need a box/wall design

[NhustlaR 10+ year member]

they are just the dimentions. haha i just drew it up to show the trunk kind of slants upward. that picture really has no bearing on the box, unless you wanted to make the top of the box/wall slanted

 

[NhustlaR 10+ year member]

i was thinking putting the port's in the middle, but idk if 3 1/8 inches is enough for a port width i want.

I kinda wanted the ports up top, but with only 17 inches from the back, i doubt that will happen. Possibly glassing the top?

 

[PV Audio 5,000+ posts]

Dude, no one understands what you're saying //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

Post a picture of the trunk.

 

[PV Audio 5,000+ posts]

If you have time to hate and make snide remarks, why don't you help him out yourself?

 

[NhustlaR 10+ year member]

haha I guess this idea was a total shithole. thanks for your help everyone :shakes head:

all I posted that pic for was to show the dimentions of the trunk, its not too hard to see that......guess im goin with my origional design

 

[Stem 10+ year member]

**** ur giving 2 15 sx's 2.5 cubes EACH!?!? lol wow ok

 

[MikeyB 5,000+ posts]

**** ur giving 2 15 sx's 2.5 cubes EACH!?!? lol wow ok

x2?!?!?!!? and only 2000 rms to the pair for spl? They can take more than 1000 rms a piece.

 

[PV Audio 5,000+ posts]

x2?!?!?!!? and only 2000 rms to the pair for spl? They can take more than 1000 rms a piece.

You say that as though 1krms isn't alot of power, or that they won't be loud with that much.

 

[MikeyB 5,000+ posts]

You say that as though 1krms isn't alot of power, or that they won't be loud with that much.

Its a lot of power but they can take more is all I'm saying. But its your choice so if you choose 1krms then cool, if you give em more then thats cool too.

 

[NhustlaR 10+ year member]

if you had half a brain you would see that 39L*17H*27W equals 17901.

That, divided by one cubic foot(1728) equals 10.359 cubic feet. 10.359 divided by 2(one for each sub, go figure) equals 5.17 cubic feet NET PER SUB.

no where do I see 2.5 cubes per sub......

and about the wattage, 2krms will be quite fine, especially since i can get a anp that does 2k @ .5 ohms for 1/3 the price of a orion 2500.1. Everyone has their reasons....ask questions before you give dumbass remarks.