need a box design...by this weekend

[dvrmstrng 5,000+ posts]

Hey guys, im going home this weekend from college and i want to try to build a new box for my sub while im there....im looking for someone here to design it for me...

Sub will be Fi Q 18...

trying to get as close to 6 cubes ported as possible

sub will be firing up

port i want to run along the bottom of the box the full length of the box

MAX DIMENSIONS

width 41 inches

height 16.25 inches

depth 25 inches

i want to get between 80-90 sq inches of port.

if someone is willing but needs a few bones from paypal i am willing to accommodate for good plans.

thanks dudes!

Click to read more...

 

[rpfuror 10+ year member]

I'll see what I can do what tuning freq?

It looks like you can get 34Hz @ 6 cu/ft, hows that?

 

[dvrmstrng 5,000+ posts]

sounds good my man...if 6 cubes is not possible with that depth im gonna see if i can stretch out a few more inches...

 

[rpfuror 10+ year member]

with your current Max dimension you can get

84 sq/in of port @ 6 cu/ft @ 33.5 Hz

 

[dvrmstrng 5,000+ posts]

im going to the gym...so im gonna measure..i might be able to get another inch or two for depth...so i can get my tuning right at 32...ill be back around 11 if your gonna be on and ill give you the measurements.

thanks a ton

 

[dvrmstrng 5,000+ posts]

i can increase the depth by one inch max after MDF...i have 26 inches deep in there now and its absolute MAX

 

[dvrmstrng 5,000+ posts]

anyone else care to help out?!

 

[bluelceii 10+ year member]

Here you go according to your dimensions. 6.5 @ 32Hz. If you want cut measurements or sketchup file, pm me.

 

[rpfuror 10+ year member]

Nice!! I put one togehter similar what is the port parameters?

 

[bluelceii 10+ year member]

89 sq inches

 

[dvrmstrng 5,000+ posts]

ahh perfect...PM sent.

 

[bluelceii 10+ year member]

PM answered...

 

[dvrmstrng 5,000+ posts]

i need to know how to build this box...like what side to start with...this is my first build and im a little confused about where to start..i need to know weather to start with the side or the top or the port....

 

[pwnt by pat 10+ year member]

Ever play with legos? It's like that.

 

[dvrmstrng 5,000+ posts]

i know i just didnt know how to do it...looks like i should start with the bottom...attach the sides.....do the double baffle top and front with the port attached....then attach that to the sides