My system won't push

[Heat187 10+ year member]

Hello,

I have a problem with my subs not playing. My amplifier is getting power and battery capacitor because I see the voltage constantly at 14 volts. Don't know if thats good or bad but the amplifier diagnostic LED is green. The subs will hit a couple of time once I disconnect the fuse from the amp or the inline wire. Weird. But don't know whats wrong and why the subs won't play. I would appreciate any help.

Thanks:crazy:

Click to read more...

 

[iamamp3pimp 5,000+ posts]

whats the model number of the amp>

where is crestview?

May be able to help out in person

 

[Heat187 10+ year member]

I have a blackmaxx 2250 and an alumq12 sub. 1000 watts max amp and 1000rms sub. I got a distributor cap and the same thing happens. I noticed if I take the power off the battery cap and then put the amps power wire on the battery cap it will work til the battery cap drains back to 0. But it just will not work with the power and cap are touching at the same time.

 

[Heat187 10+ year member]

Oh, and crestview is pretty far from tampa. I'm north western by pensacola

 

[Heat187 10+ year member]

I had it at 2ohms but rewired it to 4ohms like I had it 2 years ago and it still doesn't play. Only when I do the same thing with the power.

 

[Heat187 10+ year member]

Yeah I meant distribution block. My bad. But it is unfused. I have an 80 amp inline fuse. Can that be a problem?

 

[Heat187 10+ year member]

Oh and my amp is grounded. Whenever its not grounded good it either won't come on or the diagnostic LED would be red

 

[Heat187 10+ year member]

NVM. I fixed the problem. For some reason the LED on my switch for the amp was showing green in reality the amp wasn't getting the ok to the subs. Rewired the switch for the remote and it doesn't light up anymore but it works. Thanks for the help though guys. I did learn a couple of things.//content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif