My system so far *Pics*

[Eric111e 10+ year member]

As many of you know i had a thread when i did my dynamat and that lasted quite long. Heres the link in case you missed it. http://www.pbnation.com/showthread.php?t=1589822

I have one problem. The 200 amp i got from knukonceptz is not working right. It is only charging at 10.5 volts. Thats means i dont even have enough power to turn on the amp, since it needs 12V. Im returning it to knukonceptz and i am ordering a 300amp from a really really good company //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif Not the cheapest of things but it will be perfect:evilgrin:

Here you guys go...

Inside the box

Up close shot

Back/Magnet

Side View

Crossover

Tweeter

Whole component set

MDF Ring with non-hardening clay to seal it really good

Click to read more...

 

[Eric111e 10+ year member]

Another picture

Flush mounted tweeter Tweeter

View of the whole door

This is 1inch tubing holding tweeter wires,speaker wire,amp power/ground

Some of my Fiberglassing work

 

[Eric111e 10+ year member]

Holds amp

JL 2/300

Panels back on. Crossover rack,also the distro block and ground block as mounted on that but i forgot to get pictures.

Cant even tell anything is behind it

Amp rack

German girls FTW?

And there it is.

Coming soon:

300amp alternator,2 15" SI Mags, 20.1 //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif Look for the thread sometime in the future. Im hoping i will be really close or over 150db. So i have amazing speakers and amp but no sound. Thanks knukonceptz :tdown: :tdown:.

 

[Eric111e 10+ year member]

Also for you more knowledgable people, do you have any other suggestions of why im not getting 12V to turn on my amp? I even check the 12V+ ignition wire on my HU and it is only 10.5V. My optima is 100% charged. I took a DMM and checked my voltage at the alternator postive terminal and it is only putting out 10.5V at 1500rpms. I figure the alternator is defective so i contacted knukonceptz and they said to send it back. I just hope theres something wrong with it and its not something im doing wrong.

 

[acold7dusta 10+ year member]

on your other thread it says you got about 24 cuts in your hands from the dynamat. im just wondering, what is in sound deadener that cuts your hands? is it from the razor you use to cut it, or is it the acctual mat that when you press down fibers poke threw and cut you?

-kev

 

[azbass 5,000+ posts]

on your other thread it says you got about 24 cuts in your hands from the dynamat. im just wondering, what is in sound deadener that cuts your hands? is it from the razor you use to cut it, or is it the acctual mat that when you press down fibers poke threw and cut you?
-kev

the foil part. (the shinny stuff) is sharp

 

[Eric111e 10+ year member]

I didnt even mean to put that link in there i just copy and pasted it from another website i post on. Oh well you guys can look at it to see my dynamat work

 

[MBrock4u 10+ year member]

Sweet!!

 

[SkwurlyFab 10+ year member]

Is that an aftermarket grill in your door?

 

[90accordman 5,000+ posts]

looks real clean

 

[wesl56 10+ year member]

nice how u got all the stuff hidden behind the panels...

i like that german girl too... almost as hot as that speaker shes holding //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 

[Eric111e 10+ year member]

Is that an aftermarket grill in your door?

Its just the rainbow grill. I havent decided if im going to keep it or take it off. I kinda like it though. Matches the tweeter

 

[GemaRastem 10+ year member]

you might not have a good ground on your amp if you are only seeing 12 volts on the remote line. Also did you do any testing with your tweeters right there? seems a bit close to the listener/off axis.

 

[HotCarl 10+ year member]

is that an explorer i spy?

cleverness on hiding the amps and X-overs.

 

[Eric111e 10+ year member]

yeah it an 02 explorer sport