My Soon To Be Setup

[Fate710 10+ year member]

Well I'm about to order my speakers and my amp for my setup. I already have the sub. Let me know what you think about the setup.

HU: Jensen VM9410

Kick Panel: Q-Logic Kicks housing CDT EF-61

Front Door: Tang Band 6.5" Woofers

Rear Door: Alpine Type S Coax

Speaker Amps: Soundstream PCA4.400 running the door speakers & Soundstream PCA2.360 running the component speakers

Sub: 18" SX in custom built box

Sub Amp: Soundstream PCA1500D

Electrical: Everstart MAXX1000(1000CCA), 160 Alt, and Big 3

Will the electrical system be ok or should I change/add some things? I've talked to a few people and they say the front stage should be loud enough to keep up with the SX.

Click to read more...

 

[azbass 5,000+ posts]

beef up the kickpanels. and maby a different HU

 

[jgarcia9102 10+ year member]

so you dont have any tweets other than your rear fill? if thats the case, you did it bass-ackwards. The tweets are the most directional and need to be positioned in front of you. maybe im missing somehting, but im hoping your getting tweets.

 

[Fate710 10+ year member]

teh CDT set is a comp set with the tweets in the kick panel and I will probably add a surface mount tweet up in the door panel.

 

[Fate710 10+ year member]

The Jensen should be fine. It has front, center, rear, and sub RCAs for it. What else is it missing?

 

[JimJ 5,000+ posts]

teh CDT set is a comp set with the tweets in the kick panel and I will probably add a surface mount tweet up in the door panel.

Don't add the extra tweet.

What else is it missing?

It's missing the ability to direct the midbass to the Tang Bands and let the CDT's take care of the midrange and highs...at the very least, you'll need outboard Xovers, not to mention an extra two channels of amplification to run the midbasses.

 

[Fate710 10+ year member]

Ok. Well now I'm definately confused. AlterAudioUSA reccomended me what to get on the amps(he said get usamps but I already had teh PCA1500D from SS so I want to get all SS amps).

Ok so don't get the extra tweets. Thats fine.

Why the extra 2 channels of amplification. The Midbass and coaxs would be run off the the 4-channel amp. Do I need a 4-channel for the component set?

Please reccomend any changes you can. I want to get stuff soon but I want to make sure I get the right stuff.

 

[SAG3 5,000+ posts]

Why the extra 2 channels of amplification. The Midbass and coaxs would be run off the the 4-channel amp. Do I need a 4-channel for the component set?

no you need two more channels for the components

 

[Fate710 10+ year member]

bump it up