My single 10" sealed box build

[iagrdshaka 5,000+ posts]

looking forward to finished pics

//content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[vorgath 10+ year member]

Still need

1) Build an amp rack and cover

or

2) Mount the amp in the spare tire well

Here's some pics

http://memimage.cardomain.net/member_images/6/web/2082000-2082999/2082526_14_full.jpg

http://memimage.cardomain.net/member_images/6/web/2082000-2082999/2082526_15_full.jpg

I haven't put all the plastic interior pieces back in, since I'm going to insulate them and paint it all to match the box.

 

[JimBo930 10+ year member]

Wow that is very clean, what kind of car do you own? Looks very similar to a firebird/camaro. And how did you raise the sub up to make itlook like that?

Very nice

My Bad i just noticed that you drive a 91 Camaro, so i take it you made a sealed box, or is the port on the side somewhere?

 

[vorgath 10+ year member]

Sealed box, 0.75^3, I'll try a ported box soon, but that will be tricky.

Here's a few pics of how I made it (used fiberglass on top, right away, no fleece):

http://www.cardomain.com/ride/2082526/7

And because I'm going to build a ported box anyway, I didn't smooth everything as much as I could have done, it's good enough the way it is, considering it's my first sub install ever.

 

[JimBo930 10+ year member]

Ya , its such a pain in the *** to fit a prefab box into camaros and firebirds. I tried to fit a hatch back box into my firebird with my type r and the hatch wouldnt shut!!

So i decided to build my own, i wanted to go ported anyways so i hope it will work out. Ill post pics when im done

 

[vorgath 10+ year member]

How big will your box be ? Tuned to what ? All MDF or MDF on all sides but fiberglassed top ?

 

[JimBo930 10+ year member]

The specs say that the box should be about 1.3 cubic feet, my design is hovering a little above that, and im thinking about tuning it to 30-35 hz. Im probobly going to make the box out of MDF and then just fibreglass a cool display on the top of the box. This is gonna be my first build so i dont know if it is gonna turn out as good as i hope it will.

 

[JimBo930 10+ year member]

The specs say that the box should be about 1.3 cubic feet, my design is hovering a little above that, and im thinking about tuning it to 30-35 hz. Im probobly going to make the box out of MDF and then just fibreglass a cool display on the top of the box. This is gonna be my first build so i dont know if it is gonna turn out as good as i hope it will.

Woops double post