My first box.

[chambiec1 10+ year member]

Looks like my Kicker has a new friend to play with... //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

System should be in and going later this week. I will be sure to get some installed pics when the time comes, and maybe some videos if time allows.

 

[poundindak69]

nice lookin amp man

 

[silvercookie 5,000+ posts]

what happened it got tired of playing with itself?

 

[chambiec1 10+ year member]

what happened it got tired of playing with itself?

Well, it and the box got in a fight and it has been moping around for a few days, so I thought I would get it a friend to play with.

//content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif//content.invisioncic.com/y282845/emoticons/tongue.gif.6130eb82179565f6db8d26d6001dcd24.gif

 

[tcguy85 10+ year member]

nice. the massive amps are good. they sure look nice too!

 

[babaganoush123 10+ year member]

was it hard to make your 1st box? i gotta start to on a ported one 8 -9 cubes for a 18 btl????

 

[chambiec1 10+ year member]

was it hard to make your 1st box? i gotta start to on a ported one 8 -9 cubes for a 18 btl????

Nope... just follow the guidelines for your cuts, and have a good idea of what you what to do before you go chopping away at a sheet of MDF.

 

[babaganoush123 10+ year member]

I Never Get The Port Dimensions Or Sq Inches That Should Be In??

 

[babaganoush123 10+ year member]

You Only Used One Sheet? Mdf

 

[poundindak69]

You Only Used One Sheet? Mdf

most likely yes he did but for your box make sure you have two sheets, when i built my 8 cube box for my ssd i used 1 1/2 sheets.

 

[chambiec1 10+ year member]

most likely yes he did but for your box make sure you have two sheets, when i built my 8 cube box for my ssd i used 1 1/2 sheets.

I used a full sheet, and like a 15.5" x 13.25" section off the other. //content.invisioncic.com/y282845/emoticons/redface.gif.62fdbfe1a101588a808c4cff71bcb942.gif

 

[Lakota 5,000+ posts]

Hell of a lot better quality that my first box Looks like all the joints meet up pretty well. Great job; your work will only continue to improve!

 

[azbass 5,000+ posts]

looks like the box was really hard to build.

 

[chambiec1 10+ year member]

My KnuKonceptz wiring kit came today. Awesome quality... I should have some install pics by the end of the weekend.

 

[chambiec1 10+ year member]

Well, he install didn't happen this weekend, I'm having some trouble figuring out where to run my power wire, and ran out of time(and daylight) to do it. Plus I still need to seal up my box.

So, here are some pics of a test fitting of my box, to get an idea of the room I have for everything.

And here is my bare trunk, waiting to be filled with audio goodness again.

HOPEFULLY, I will have this all in by the end of the week. I will be sure to get some pics. I am going to keep the box bare for now, and then bedline it once the weather gets warmer.