My Box Build. Do I Know What I'm Doing?

Status
Not open for further replies.

Posjr
10+ year member

Junior Member
I'm making a sub box for the apt. My goal was to get as low as i can with min. space. Right now i'm at 1cube box tuned to 24hz. This is based of a infinity ref W860. Why in 8in? I got a grumpy old lady up stairs.....

Here is a pix of the tune i did with winisd. Also its a 12.5x2in port, 25sq inch port, and I think i'm at 110in length of port.

My concern now is am i wasting my time because its an 8in?

SENSITIVITY (2.83V @ 1M): 91dB

POWER HANDLING: 250WR M S (1000WPEAK )

FREQUENCY RESPONSE: 30HZ ~ 400HZ

VOICE COIL DC RESISTANCE: REVC (OHMS) . . . . . . 3.30

VOICE COIL INDUCTANCE @ 1 KHZ: LEVC (MH) . . . . . . . 2.31

DRIVER RADIATING AREA: SD (IN2) . . . . . . . . 33.17

SD (M2) . . . . . . . 214.00

MOTOR FORCE FACTOR: BL ™ . . . . . . . . 12.56

COMPLIANCE VOLUME: VAS (FT3) . . . . . . . . 0.54

VAS (LITERS) . . . . . 15.23

SUSPENSION COMPLIANCE: CMS (μM/N) . . . . 232.70

MOVING MASS, AIR LOAD: M MS(GRAMS). . . . 124.20

MOVING MASS, DIAPHRAGM: MMD (GRAMS) . . . 122.40

FREE-AIR RESONANCE: FS (HZ) . . . . . . . . 29.60

MECHANICAL Q: QMS . . . . . . . . . . . 6.10

ELECTRICAL Q: QES . . . . . . . . . . . 0.483

TOTAL Q: QTS . . . . . . . . . . . . 0.45

MAGNETIC-GAP HEIGHT: HAG (IN) . . . . . . . . .0.315

HAG (MM) . . . . . . . . 8.00

VOICE COIL HEIGHT: HVC (IN) .. . . . . . . . . 1.34

HVC (MM) . . . . . . . . . . . 34

MAXIMUM EXCURSION: XMAX (IN) . . . . . . . 0.513

XMAX (MM) . . . . . . 13.00

Thanx

2ex20qx.png


2zjm35x.jpg


 
After tossing and turning last night i feel i should of went with a 10in...... You guys know any 10in subs that can be in a 1cube box? Rms under 500@4ohms Price under $200.....

I'm not trying to be loud just want to feel some 25hz. I'm not sure if this 8in will put out enough!

Also i have gone through a list of subs at 10in and cant get lower than 1.8cubes.

 
I wouldn't be afraid to use an eight.... Btw, your enclosure looks nice. //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 
Status
Not open for further replies.
Activity
No one is currently typing a reply...

About this thread

Posjr

10+ year member
Junior Member
Thread starter
Posjr
Joined
Location
San Jose
Start date
Participants
Who Replied
Replies
4
Views
687
Last reply date
Last reply from
Posjr
IMG_0710.png

michigan born

    May 14, 2026
  • 0
  • 0
IMG_0709.png

michigan born

    May 14, 2026
  • 0
  • 0

New threads

Top