My 28lb Beast Has Arrived

[SoCalBean420 10+ year member]

looks like the spider is sinking a little or is it just me.

Just you lol...

It's the angle in which I took the pic.

 

[SoCalBean420 10+ year member]

hmmmmmmmmmmm i'd buy one
what are the ts specs on this? fs,xmax?

I'll post full T/S when I receive them.

Here's a lil info from the original F/S thread...

This is a TC sounds NEO motor, very similar in strength to a TC3000 motor.

It has a 3" 8 layer flatwound coil, D1.4 impedance, that is 2.75" long!!!

I used a 10" spider adpater to allow for the use of the 9.75" x 3" progressive roll spider. It has sewn on heavy gauge leadwire too!

The sub has terminals on the side of it, but they were actually used to make a connection between the leads and the direct connection wiring. This sub would be wired like a DD/AQ subwoofer.

I used a very heavy duty paper/pulp cone and a REAL, raw carbon fiber dustcap.

The basket and motor have been coated with a light touch of black texture and then clearcoated.

This sub will work well sealed, ported and last but not least, infinite baffle. Sealed and ported power handling would roughly be 1500w RMS and somewhere around 1200w when used IB.

 

[rc10mike 10+ year member]

I wish there were more neo motor subs, its like a 100lb 27" Crt TV vs a 46" 50lb LCD. A huge 50lb ferrite motor just screams old-tech.

 

[littlepucker]

I wish there were more neo motor subs, its like a 100lb 27" Crt TV vs a 46" 50lb LCD. A huge 50lb ferrite motor just screams old-tech.

No offense man. But that may be one of the worst analogies i have ever heard.

 

[RowJoe 10+ year member]

No offense man. But that may be one of the worst analogies i have ever heard.

No offense man, but that was a poorly written post.

 

[Kyle_Keating 10+ year member]

3hp neo!

 

[SoCalBean420 10+ year member]

3hp neo!

Yes

 

[SoCalBean420 10+ year member]

T/S...

Fs = 26.9 Hz

Re = 2.8 Ohms

Qms = 7.22

Qes = 0.48

Qts = 0.45

Cms = 130.0 uM/N

Mms = 320.0 grams

Sd = 1210.0 cmsq

Vas = 279.4 liters

SPL = 92.1 dB

X-max = 26mm

 

[adio 5,000+ posts]

aw cutty......