MT to BTL swap

[squeak12 10+ year member]

Ill be running a 12" BTL in Dec. if you want to check it out matrxx

 

[matrxx dude 5,000+ posts]

ok i will

 

[Jared530 10+ year member]

ive been hearing alot about this infamous fi btl. makes me wanna buy one. Its like everyone changes from RE to Fi over night.

 

[ngsm13 5,000+ posts]

Cooling isnt needed. Copper VC isnt needed, High Xmax coil isnt needed. However, the 3rd magnet may be a plus.
I could be wrong on all accounts though.

You are an absolute r-tard.

Scott states the stock 2magnet BTL is similar to the MT.

Just get a stock 2magnet, if you want you could get just the P Chamfer (really just relieves pressur off the dustcap)... or get full cooling if you plan to deathmatch/burp for long periods of time (which includes the p chamfer).

//content.invisioncic.com/y282845/emoticons/fyi.gif.9f1f679348da7204ce960cfc74bca8e0.gif

nG

 

[matrxx dude 5,000+ posts]

wouldn't the p chamfer change the bl.

 

[ngsm13 5,000+ posts]

Minutely.

nG

 

[matrxx dude 5,000+ posts]

any more thoughts

 

[saywhat? 5,000+ posts]

the amps were before the sub switch, he did a direct drop in of the BTL's replaceing the MT's, i believe he noted a 1.1DB increase

where was this noted? He changed amps, and then did the subs at the same time from what he said in his thread.

 

[germanyt 10+ year member]

Steve meade has. Stevemeadedesigns.com

ditto. but he probably couldn't tell you what it's metering. don't think he even cares. his shit is too loud and that is all that matters. i do know he has one of the loudest bass race vehicles in the world. he would probably tell you that the BTLs are better but i believe he is sponsored so it's sort of a biased opinion but from what i've heard, the BTL and MT are very similar drivers. even some of the same parts are used. (this is all just what i've discovered in reading, no practical experience with BTL.............for now)

 

[baseballer1100 5,000+ posts]

ditto. but he probably couldn't tell you what it's metering. don't think he even cares. his shit is too loud and that is all that matters. i do know he has one of the loudest bass race vehicles in the world. he would probably tell you that the BTLs are better but i believe he is sponsored so it's sort of a biased opinion but from what i've heard, the BTL and MT are very similar drivers. even some of the same parts are used. (this is all just what i've discovered in reading, no practical experience with BTL.............for now)

I dont think he is sponsored.

 

[germanyt 10+ year member]

he has updated vids on there, but i dont think he updated the list of his equipment. he does have 3 alts and a buncha batts though i believe.

If I remember, it's two 350 amp alts and 5 yellow tops(maybe four)

 

[germanyt 10+ year member]

I dont think he is sponsored.

Then he has lots of money.

 

[matrxx dude 5,000+ posts]

Then he has lots of money.

thats probley more the case

 

[germanyt 10+ year member]

You are an absolute r-tard.
Scott states the stock 2magnet BTL is similar to the MT.

Just get a stock 2magnet, if you want you could get just the P Chamfer (really just relieves pressur off the dustcap)... or get full cooling if you plan to deathmatch/burp for long periods of time (which includes the p chamfer).

//content.invisioncic.com/y282845/emoticons/fyi.gif.9f1f679348da7204ce960cfc74bca8e0.gif

nG

Also note that the third magnet is probably useless without the high xmax coil

 

[DeuceLee 10+ year member]

Then he has lots of money.

crazy bastards got enuff flow for a 20K msrp amp...//content.invisioncic.com/y282845/emoticons/eek.gif.771b7a90cf45cabdc554ff1121c21c4a.gif i'm sure he got a super discount on it but stilll...daymmM!!