G33kman
Junior Member
Ok so I have a 2007 Dodge Charger that I'm looking at building a box to put (2) Memphis 10" C3 Subwoofers in.
I have looked high and low for a good spec sheet to input the t/s parameters into but can't find anything...
The best that I could find is what the xmax value is so I'm not really sure what to dimensions to build the box to. I'd like to tune it around 30hz if possible but without these parameters I know it's not going to happen very easy or at all.
I'm wondering if anyone has any idea what dimensions I should build my box to.
I want 2 chambers and ports (rectangle built from the wood of the box no piping) I did find some info saying the max ported volume is 1.36cu ft per subwoofer on sonic electronics site but I'm not to sure how reliable that is.
If someone could give me some info on what they would recommend I would greatly appreciate it!
I have looked high and low for a good spec sheet to input the t/s parameters into but can't find anything...
The best that I could find is what the xmax value is so I'm not really sure what to dimensions to build the box to. I'd like to tune it around 30hz if possible but without these parameters I know it's not going to happen very easy or at all.
I'm wondering if anyone has any idea what dimensions I should build my box to.
I want 2 chambers and ports (rectangle built from the wood of the box no piping) I did find some info saying the max ported volume is 1.36cu ft per subwoofer on sonic electronics site but I'm not to sure how reliable that is.
If someone could give me some info on what they would recommend I would greatly appreciate it!