MAYBE Sealed setup.

[Savackz]

I have my setup below right now and am wondering if I want to go sealed. I just don't play my system full tilt now a days and really only play regular music rather than rebassed and slowed music. So I am thinking of doing a sealed setup. What are your guys' opinion on this?

Click to read more...

 

[Jeffdachef 5,000+ posts]

why not.

 

[Savackz]

why not.

Do you know of any subs for it? Same amp, if not the same ohm or lower. Or how many, what size, anything like that? I wasthinking 2 15s or 2 18s.

 

[Jeffdachef 5,000+ posts]

Do you know of any subs for it? Same amp, if not the same ohm or lower. Or how many, what size, anything like that? I wasthinking 2 15s or 2 18s.

stereo integrity ht or dayton audio HO

 

[Savackz]

[quote name='Jeffdachef']stereo integrity ht or dayton audio HO[/QUOTE]

I was thinking two of those 18s at 2 ohms on my soundqubed. Too much power? @Jeffdachef

 

[shauncox26]

Tc 2000 15's or lms-r ultras if you wanna go nuts. I have a pair of the tc-2000 12's and its nuts how loud they get and clean they sound. Took my IA 20.1 without flinching.. You could set your gains moderately and have nice head room. If you don't mind spending the money the lms-r ultras will be really nasty I'm sure.

 

[Savackz]

Tc 2000 15's or lms-r ultras if you wanna go nuts. I have a pair of the tc-2000 12's and its nuts how loud they get and clean they sound. Took my IA 20.1 without flinching.. You could set your gains moderately and have nice head room. If you don't mind spending the money the lms-r ultras will be really nasty I'm sure.

I am looking more around 150 per woofer. Maybe 200.

 

[Jeffdachef 5,000+ posts]

[quote name='zscarlson1']I was thinking two of those 18s at 2 ohms on my soundqubed. Too much power? @Jeffdachef[/QUOTE]

they will take all of it, its a sealed box so you arent gonna run into too much mechanical issues.

 

[Savackz]

they will take all of it, its a sealed box so you arent gonna run into too much mechanical issues.

At 2 ohms, those would be fine? And would you recommend the HT18 or the DAytons?

 

[Jeffdachef 5,000+ posts]

At 2 ohms, those would be fine? And would you recommend the HT18 or the DAytons?

both are fine and can work in small enclosures. Just take your pick. The HT 18s are cheaper than the daytons. You can go with 15s with daytons if you dont have enough clearance.

 

[Savackz]

I have the clearance. I have 2 15s in 7 cubes after all displacements right now so. Can't complain for space.

 

[Jeffdachef 5,000+ posts]

I have the clearance. I have 2 15s in 7 cubes after all displacements right now so. Can't complain for space.

two HT 18s need 8 cubes after displacement. HO 18s need 6-8

HOs cost more, 3 inch coil

HTs cost a lot less, 2.5" coil and a lot beefier magnet

 

[Savackz]

two HT 18s need 8 cubes after displacement. HO 18s need 6-8
HOs cost more, 3 inch coil

HTs cost a lot less, 2.5" coil and a lot beefier magnet

Do you mind linking your Dayton HO that you are scoping out? I see a few of them.

 

[Jeffdachef 5,000+ posts]

Do you mind linking your Dayton HO that you are scoping out? I see a few of them.

there's only one Dayton Audio RSS460HO-4 18" Reference HO Subwoofer 4 ohm

The rest are install stuff/enclosures etc..

 

[Savackz]

Okay. I might end up going with the HT18s and have to get a crossover/equalizer for everything else. Trying to decide whether to sell my stuff first.