made some bus bars (PICS!!!)

[dcole18 5,000+ posts]

lol... im not saying i was gonna just throw the batt out, its on a 2amp trickle as i type this, but if it is too far gone, im just sayin im only out $90

 

[miker 5,000+ posts]

I was sad.. I just had to throw out a 150$ battery..

Made me upset..

 

[dcole18 5,000+ posts]

I was sad.. I just had to throw out a 150$ battery..Made me upset..

im sorry to hear that //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif

but if this one is bad im gonna upgrade to powermaster //content.invisioncic.com/y282845/emoticons/cool.gif.3bcaf8f141236c00f8044d07150e34f7.gif

 

[Fear Of Theive 10+ year member]

A Few Machines

Hurco BMC 40, 30 station tool changer,with 4th axis rotary table.

Hurco MB2R, 24 station tool changer, equipped with ultimax 3 controls

Hurco BMC 50, 20 station tool changer

I also have A Cert In Sysco Programming, Cnc G Code, CAD and Auto Inventor Plus I'm Working on a CAM Cert.

Plus i have 2 years of my Apprentice ship done and i haven't even left high school...But Yea i guess i'm unqualified. Few years from now you'll be working for me.

Also in the fall i'll be attending Pittsburgh college of Pittsburgh Institute of Aeronautics

 

[dcole18 5,000+ posts]

A Few Machines
Hurco BMC 40, 30 station tool changer,with 4th axis rotary table.

Hurco MB2R, 24 station tool changer, equipped with ultimax 3 controls

Hurco BMC 50, 20 station tool changer

I also have A Cert In Sysco Programming, Cnc G Code, CAD and Auto Inventor Plus I'm Working on a CAM Cert.

Plus i have 2 years of my Apprentice ship done and i haven't even left high school...But Yea i guess i'm unqualified. Few years from now you'll be working for me.

hehe... thats worth a chuckle

 

[Fear Of Theive 10+ year member]

Why so?

 

[Lakota 5,000+ posts]

im sorry to hear that //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif

but if this one is bad im gonna upgrade to powermaster //content.invisioncic.com/y282845/emoticons/cool.gif.3bcaf8f141236c00f8044d07150e34f7.gif

I've been curious about Powermaster. However, my Kinetiks are still doing fine

 

[Colt9699 10+ year member]

Ok SOMEONE inserted that in there. I DID NOT say that. Another reason I don't come here much...too many assholes.
Fear of thieves....you aren't a machinist. Going to a tech school and working for a little bit doesn't qualify you as a machinist. Unless you got 4+ years behind you and can operate, set-up, program any or a few CNC machines. I don't mean to be a prick but I find it very disturbing for someone who has ran a few machines in their life other than tech school and can just call themselves a machinist. But that's the way society is nowadays.

I've got 8 years behind me and still climbing. Name some machines you've ran in the past. I'll state what I've run: Komo w/ Fanuc controls, Cinncinati vertical and horizontal, and with Fanuc controls as well, Matsuura with Fanuc and Yasnac controls, both controls very similar, Robodrill w/ Fanuc controls, Cincinnati Sabre, Cincinnati Arrow, Mazak CNC turning, and various models of Fadals. Also manual machinery exp as well. Btw, if your looking for a job, consider the aerospace industry. Around my area, it's the hottest job market right now.

Ok now it's my turn I have10+ years in the machining indusrty.

I have and am still setting up programming and opertaing cnc lthes milsl and all my own secondary m,achinery.

I have experience on Fadal mills mazak turning centers and vmc's daewoo okuma.........and I could go on and on.

does this makle me a machinist?? I think yes and I also think that Fear is a machinist because their are different levels of Machinst.

I am considered a class A machinist/Programmer.

It also is not very hard to make your own bussbars as long as you can red a print and run a few secondary machines.

I think the Op did a good job considering his tools and skill set.

Hey fear can I work for you someday too??? //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif//content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif

 

[skydeaner 10+ year member]

Ok now it's my turn I have10+ years in the machining indusrty.
I have and am still setting up programming and opertaing cnc lthes milsl and all my own secondary m,achinery.

I have experience on Fadal mills mazak turning centers and vmc's daewoo okuma.........and I could go on and on.

does this makle me a machinist?? I think yes and I also think that Fear is a machinist because their are different levels of Machinst.

I am considered a class A machinist/Programmer.

It also is not very hard to make your own bussbars as long as you can red a print and run a few secondary machines.

I think the Op did a good job considering his tools and skill set.

Hey fear can I work for you someday too??? //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif//content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif

boomintahoe is just scared because they hire guys to do his job right out of tech school for half of what they pay him and then kick him out to the curb //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[dcole18 5,000+ posts]

I think the Op did a good job considering his tools and skill set.

tank you //content.invisioncic.com/y282845/emoticons/cool.gif.3bcaf8f141236c00f8044d07150e34f7.gif

 

[Colt9699 10+ year member]

tank you //content.invisioncic.com/y282845/emoticons/cool.gif.3bcaf8f141236c00f8044d07150e34f7.gif

You are welcome. //content.invisioncic.com/y282845/emoticons/veryhappy.gif.fec4fed33b4a1279cf10bdd45a039dae.gif:veryhapp: