lpine type r subwoofer

[luckyj86047 10+ year member]

can anyone please help me in a designing aported enclosure for 2-alpine type r 12's?

Click to read more...

 

[mylows10 5,000+ posts]

piece of cake,have done a couple including a single 12 doing 141.7 db in a trunk on 1200 watts

 

[luckyj86047 10+ year member]

i mean i have 2 alpine type r 12 inch subs dual four ohm i need all the dimensions on how to big one solid ported box i would really appreciate it if you could help me out

 

[mylows10 5,000+ posts]

what car or truck need area where the box will be

 

[luckyj86047 10+ year member]

back seat of 2006 toyota tacoma truck its a four door truck

 

[luckyj86047 10+ year member]

do you think 2 of these in a ported box will hit pretty hard i got 1000 watts going to each sub

 

[mylows10 5,000+ posts]

40 long x 13.5 tall x 15.5 frt to back port 3 inches wide 11.75 long with a 4 inch L should be around 33 hrtz .dont forget the 45s in the 2 back corners and in the corner of the port

 

[luckyj86047 10+ year member]

can u explain the 4 inch l im confused sorry bro

 

[mylows10 5,000+ posts]

its a L shaped port port on the left side behind the drivers side.and what amps are you using

 

[luckyj86047 10+ year member]

2-kicker 1000.1

 

[mylows10 5,000+ posts]

you need to link them if you can ,that s the easiest way to make them work ,if they cant be linked together then you have to line match them so that they are putting out the same power to the subs.this very important if you use the 2 subs in one box

 

[luckyj86047 10+ year member]

they can be linked do u think it will hit hard in the bo design you gave me

 

[mylows10 5,000+ posts]

yes it will ,but you need to have the electrical to back it up too ,if you leave the little 4inch piece off the port the box will be tuned a little higher at 36 hertz ,which you may like a little better ,should be louder too.what i do some times is put the box together leave the small piece of the port off ,and dont glue the top of the box on til i play with the port a little til i find the freq i want.

 

[luckyj86047 10+ year member]

ihave 200 amp alternator all wiring 0 gauge

 

[mylows10 5,000+ posts]

maybe a 2nd battery too