LOUD 6.5 component set that bleeds ears and sounds good one 100+rms?

[Racerx250 10+ year member]

get some horns and a big mid.

 

[WOT]

Id prefer a single driver for each door, dont care about what size, that will be LOUD AS HELL off of 250 watts rms a piece, for under $150 shiped.

 

[WOT]

Single driver, that can bang out some serious Linkin Park / Methods of Mayhem / Tool etc

 

[SWFL 10+ year member]

then get the speaker that is got the highest senstivity rating like 96 or higer and give it 125rms and let it rip

 

[Pyro_By_Nature 5,000+ posts]

Stop overlooking horns. They will have the ability to get stupid loud off of little power and sound a lot better than some crappy pro audio mids.

 

[WOT]

Well I asked about them like a week ago and people said I basically didnt have the tuning abilities with my amp/deck combo without spending over $100, they said I couldnt make them sound good

 

[KyleBechtold 5,000+ posts]

what about those volcanos?? i saw those on hear in the one build.. don't know how they sound/perform

 

[WOT]

Well Id just like to hear some nice sounding LOUD speakers here myself.

Instead of the Whip audio's

What about these selenium 8"s?

http://www.parts-express.com/pe/showdetl.cfm?Partnumber=264-424

There 8ohm so I would still have to bridge the kicker amp (or may just buy a different better 8ohm suited amp and sell the kicker) and give them 150rms in a sealed box on the doors? Think 2 of those would get decently loud and sound good? 96db effecient and only about $120 shipped for a set of 2 to me, within my budget. I dont plan on runing them with any crossovers/tweets obviously, loud enough?

 

[WOT]

A cheap 4 ohm driver would be nice but I havent seen any mentioned within my budget, 4ohm would allow me to give them 250ish rms @ 12.5v for a set of 2.

Id also consider buying 4 4ohm drivers and putting 2 in each door and giving them 120ish rms a piece, but I cant find one other than the Eminence Alpha-6C 6" that kinda fits that bill and how it would sound in a car instead of strapped to a quitar

 

[KyleBechtold 5,000+ posts]

https://www.clearstarmediagroup.com/shop/products.php?product=Oxygen-Audio-6-1{47}2%22-MidBass-Driver

 

[WOT]

if I find a 4ohm driver (like the one you just posted) it would either have to be a set of 2 that can take 250ish a piece, of 4 drivers, than take 100-125 a piece

Im starting to think Im gonna need 2 drivers/door, and need 4 loud 4ohm midranges. Wish those **** whip audio 6.5's were 4ohm.

Still got my eye on those 10" whip audios though. Or the 8" seleniums I posted a few posts above

 

[KyleBechtold 5,000+ posts]

if I find a 4ohm driver (like the one you just posted) it would either have to be a set of 2 that can take 250ish a piece, of 4 drivers, than take 100-125 a piece
Im starting to think Im gonna need 2 drivers/door, and need 4 loud 4ohm midranges. Wish those **** whip audio 6.5's were 4ohm.

Still got my eye on those 10" whip audios though. Or the 8" seleniums I posted a few posts above

get a tweeter with em.. 150 for the mids 100 for the tweets be done with it..

or do two in each door..

 

[WOT]

cant afford 4 of those drivers. THats $300 usd + shipping. Out of my budget

 

[SWFL 10+ year member]

go with 4 6" selenium mids and throw 100-125rms per mid and i bet you will be happy and maybe two tweeters like the st350 or w/e it is . Prob would only need two mids on 300 watts and you will be more than happy

go with this mid over the 8" it will play lower and higher according to the specs and more xmax for lower freq's

http://www.parts-express.com/pe/showdetl.cfm?Partnumber=264-422

 

[KyleBechtold 5,000+ posts]

I will say this.. be prepared to do a lot of tuning with the eminence if thats what you go with.. they get loud as piss but aren't the greatest out there..