looking for good 1/0 and 4awg 4 flex loom

[WaTTsLOk187 10+ year member]

I used 3/4" on my kicker hyperflex 0/1. It fit a bit loose but if you strech it out and pull it tight it looks and fits just fine. Plus it was easy to work with.

 

[rtillaree 10+ year member]

alright, jury's in on the techflex...

i got 50' of the 3/4 and it goes on pretty easy for the hyperflex (getting it off, isnt so easy) it has a little bit of slack in it, but not that much, wire tie it and your set...the 1/2 MAY work because there is some give in it...

as far as knu 1/0, it's really loose in the 3/4 techflex, same for the JL wire...