looking for 2 12 or 2 15s

Actually yeah that's probably good (i didn't run the #'s) if it's really got 5cf then yeah that's probably tuned right., all the prefab dual slot ported boxes I checked were tuned to like 55hz,, if something says 32hz after u subtract sub displacement it's normally really like 35hz but that's as good as it gets with prefab., those round ports make it easier to get correct air space cause port doesn't take up .5 cf.. so that would probably do well, i'll run #'s real fast
thanks bro let me know and also sum 15' subs that would really make it pound..

Sent from my SM-G935T using Tapatalk

 
[quote name='yahhhyahhh']I stay in Fort Lauderdale do you know of any places ?

Sent from my SM-G935T using Tapatalk[/QUOTE]
Just get one built and shipped. @Flastrongman ; could. He is across the way. Dave is his name. Fellow nyer. With the trip for a fine box

Sent from my 2PYB2 using Tapatalk
 
well I'm kinda shocked but if the size listed is correct and IF those are 4" ports I think after u subtract sub displacement it would be tuned to about 34hz.. so it's really good for prefab.. as far as subs I was gonna recommend 2 sundown lcs 12 (with your amp) but they don't even come in 15's yet.. see if u go with 1 15 u can get a well bigger one to go with the 800rms u have if u do 2 u need some lighter ones the 400 per sub will push fairly well.. i'll look but sundown e would work also SQ 200 15 would work and they on sale stupid cheap ($103 I saw other day) but as I was informed they don't sound good but if u want loud that'd do it.. i'll see if anything else in the 300-600rms range I can find.. well u can get 2 jlw0 v3 (d4) for $200 each, dc level 2 $229 or https://www.sonicelectronix.com/item_90862_American-Bass-XD1522.html if u just get 1 sub u could get the ab xfl or a fu 750 (that would be good on 800 rms or a sundown e or sa, lot smaller box and less $ for subs ) be sure if u get 2 u get d2 so u can wire to 4 ohm each or if u get 1 get d4 wire to 2ohm..

 
Last edited by a moderator:
well I'm kinda shocked but if the size listed is correct and IF those are 4" ports I think after u subtract sub displacement it would be tuned to about 34hz.. so it's really good for prefab.. as far as subs I was gonna recommend 2 sundown lcs 12 (with your amp) but they don't even come in 15's yet.. see if u go with 1 15 u can get a well bigger one to go with the 800rms u have if u do 2 u need some lighter ones the 400 per sub will push fairly well.. i'll look but sundown e would work also SQ 200 15 would work and they on sale stupid cheap ($103 I saw other day) but as I was informed they don't sound good but if u want loud that'd do it.. i'll see if anything else in the 300-600rms range I can find.. well u can get 2 jlw0 v3 (d4) for $200 each, dc level 2 $229 or https://www.sonicelectronix.com/item_90862_American-Bass-XD1522.html if u just get 1 sub u could get the ab xfl or a fu 750 (that would be good on 800 rms or a sundown e or sa, lot smaller box and less $ for subs ) be sure if u get 2 u get d2 so u can wire to 4 ohm each or if u get 1 get d4 wire to 2ohm..
okay thanks alot for the info what ima do is get that ground shaker enclosure and get 2 15s instead of run ima,wire them to 2 ohms and makecsuee they are 400 rms which equals to that 1 ohm 800watts

Sent from my SM-G935T using Tapatalk

 
[quote name='mclerico83']Just get one built and shipped. @Flastrongman ; could. He is across the way. Dave is his name. Fellow nyer. With the trip for a fine box

Sent from my 2PYB2 using Tapatalk[/QUOTE]

I think he resides in FL ...hence the partial screen name.
 
well I'm kinda shocked but if the size listed is correct and IF those are 4" ports I think after u subtract sub displacement it would be tuned to about 34hz.. so it's really good for prefab.. as far as subs I was gonna recommend 2 sundown lcs 12 (with your amp) but they don't even come in 15's yet.. see if u go with 1 15 u can get a well bigger one to go with the 800rms u have if u do 2 u need some lighter ones the 400 per sub will push fairly well.. i'll look but sundown e would work also SQ 200 15 would work and they on sale stupid cheap ($103 I saw other day) but as I was informed they don't sound good but if u want loud that'd do it.. i'll see if anything else in the 300-600rms range I can find.. well u can get 2 jlw0 v3 (d4) for $200 each, dc level 2 $229 or https://www.sonicelectronix.com/item_90862_American-Bass-XD1522.html if u just get 1 sub u could get the ab xfl or a fu 750 (that would be good on 800 rms or a sundown e or sa, lot smaller box and less $ for subs ) be sure if u get 2 u get d2 so u can wire to 4 ohm each or if u get 1 get d4 wire to 2ohm..
ima get this enclosure https://www.amazon.com/gp/aw/d/B00UKI5KPW/ref=mp_s_a_1_11?ie=UTF8&qid=1488136431&sr=8-11&pi=AC_SX236_SY340_FMwebp_QL65&keywords=groundshaker+sub+box

and put in these subs American Bass XD1522

Sent from my SM-G935T using Tapatalk

 
[quote name='Boomin_tahoe']Pre fab isn't gonna sound as good as a custome enclosure. @CSCStang[/QUOTE]
I can't afford a custom but I'm not looking for sq I'm mostly looking to be heard and have it loud

Sent from my SM-G935T using Tapatalk
 
These are not bad subs. I almost bought these awhile ago but instead went another route. They are basically the American Bass TNT in a steal stamped basket instead of the cast aluminum. You don't want the 1522 though your gonna want the 1544, the dual 4 ohm vc, so it can be wired to 2 ohm each sub then when wiring the 2 subs together for a final impedance of 1ohm load at the amp.

 
These are not bad subs. I almost bought these awhile ago but instead went another route. They are basically the American Bass TNT in a steal stamped basket instead of the cast aluminum. You don't want the 1522 though your gonna want the 1544, the dual 4 ohm vc, so it can be wired to 2 ohm each sub then when wiring the 2 subs together for a final impedance of 1ohm load at the amp.
SORRY I messed up..

 
Last edited by a moderator:
okay thanks alot for the info what ima do is get that ground shaker enclosure and get 2 15s instead of run ima,wire them to 2 ohms and makecsuee they are 400 rms which equals to that 1 ohm 800watts
Sent from my SM-G935T using Tapatalk
yeah sorry I had wrong ohm subs listed, I've been shopping for amps myself and looking at amps they aren't 1ohm stable (to many #'s in my head) so what subs u think u get? ab, sundown, jl, sq (they are cheap just not best sounding) just don't want u to get better subs than amp can push, that's y we tried to talk u into 1 sub so u have plenty of power for it.. of course if u get nicer subs that sound good but not stupid loud u can sell amp and get bigger one later I guess..

 
Running @ 2ohms mono isnt too shabby in itself( My CRV gets down pretty good @2 ohms mono)..Get a great amp with some head room @ 1 ohm,and a single 15 - DVC4 ohm run @ 2 ohm for the time being,and grabb up another sub and build a dual ported chamber...Subs up ,port rear in that SUV, and she can sound fantastic @ 1 ohm load. for a pair, you may even try 4-12s,or squeeze 4-15s in there or an 18,or a pair walled,8-10s even??You have some room to play with as well as to fill.Need get your electrical done right.Never rush into a complete system install,take your time and BUILD it the WAY YOU WANT,and enjoy it research , go to some shows and look at and listen to several different systems ..You can always add to it as time goes on,and buying good quality gear that last, makes it worth while for your money spent.

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

yahhhyahhh

Senior VIP Member
Thread starter
yahhhyahhh
Joined
Location
Miami, Florida
Start date
Participants
Who Replied
Replies
91
Views
3,590
Last reply date
Last reply from
BOOMINGRANDPA
IMG_1882.jpeg

slater

    Oct 4, 2025
  • 0
  • 0
Screenshot_20251004_120904_Photo Translator.jpg

1aespinoza

    Oct 4, 2025
  • 0
  • 0

New threads

Top