LOC install..help

dacomeup411

Junior Member
How would i go about putting in a line out converter in a 95 silverado? do i have 2 take the radio out or just remove a panel or can i just do it from under the dash? i have a used axxess LOC and there are 5 wires coming from it, 2 grey, 2 white, 1 black. The grey and whites are for the +/- wires but what is the black for? It looks like there was a place where the other black wire was possibly ripped out of the connector so i guess i probably need a new LOC?

 
you are catching hi level turning into rca

catch speaker leads behind radio , or rear leads in back deck

the speaker leads are your input

then connect output to rca , then rca to amp

 
the black is ground

don;t hook up the ground , just the other 2 - & + leads

after install if your getting noise than hook up ground , no noise leave wire unhooked but put a butt connector on it

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

dacomeup411

Junior Member
Thread starter
dacomeup411
Joined
Location
b-Lo NY
Start date
Participants
Who Replied
Replies
2
Views
403
Last reply date
Last reply from
350zspl
IMG_1882.jpeg

slater

    Oct 4, 2025
  • 0
  • 0
Screenshot_20251004_120904_Photo Translator.jpg

1aespinoza

    Oct 4, 2025
  • 0
  • 0

New threads

Top