LOC help

[brandinooooo 10+ year member]

that should be just fine.
then we are back to the LOC itself.

That amp DOES have high level inputs. why use an external LOC at all? just use the one in the amp.

Hahaha that thought didn't occur to me

 

[keep_hope_alive Premium Member]

that's why we're here.

try that and report back.

 

[Flipx99 5,000+ posts]

I use t taps to splice instead of cutting the factory wire. Next install, I am going with a new factory harness tied directly to the loc.

I have found high level inputs are inferior to the loc. An audible difference.

 

[keep_hope_alive Premium Member]

I use t taps to splice instead of cutting the factory wire. Next install, I am going with a new factory harness tied directly to the loc.
I have found high level inputs are inferior to the loc. An audible difference.

high level inputs are a LOC internal to the amp. it is not accurate to say all high level inputs are inferior to a LOC, just that you experienced the high level inputs on your amp(s) were inferior to your LOC(s). //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

a t-splice can compromise the wire by damaging strands and suffers from minimal conductive contact area. i don't recommend them in any application where power transfer and reliability are desired. they are fast and easy. my $.02 sorry.