KHARPS' blowthrough

[Cameron_B 10+ year member]

Looking good. I could never bring myself to a blowthrough in my Ranger though :/

got 1.5 Ported to 40hz 1 10" AQ 2200 and a Kicker KX120.2 drivers seat goes all the way back //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

I feel sorry for the passenger though.

 

[KHARPS 10+ year member]

Looking good. I could never bring myself to a blowthrough in my Ranger though :/
got 1.5 Ported to 40hz 1 10" AQ 2200 and a Kicker KX120.2 drivers seat goes all the way back //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

I feel sorry for the passenger though.

Your setup sounds pretty similar to a few I had in mine but I had a JL 1000/1 and then switched to a saz1500. I remember you had a 3'' aero firing into the passenger corner, is it still the same with this setup?

 

[smd4life 5,000+ posts]

i think it will pound either way..but 15's would be louder fo sho

 

[BigJoker 10+ year member]

I agree that I should have gotten 15s but I had to keep the cut 12'' tall or shorter or else Mike would have had to cut through a hump on the back of the cab. But now I realize I might be able to fit 15s in there sometime down the road. The cut came out to be about 31'' x 12''.

I left this morning at 7:30 to go to Mike's (hour and a half drive) and just got back at 3:00. I'm about to eat something and then go to work in the garage.

did he try and touch you? he is very sneaky //content.invisioncic.com/y282845/emoticons/eek.gif.771b7a90cf45cabdc554ff1121c21c4a.gif

 

[TeZ 10+ year member]

sweet.. Cant wait to see it when its done.. and a vid or two //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

 

[KHARPS 10+ year member]

did he try and touch you? he is very sneaky //content.invisioncic.com/y282845/emoticons/eek.gif.771b7a90cf45cabdc554ff1121c21c4a.gif

A couple times //content.invisioncic.com/y282845/emoticons/redface.gif.62fdbfe1a101588a808c4cff71bcb942.gif Haha na man Mike was cool as hell for letting me come up there today. He let me hear his wall and then shook the crap out of his house for me with his home theatre setup....it was a fun day.

 

[KHARPS 10+ year member]

sweet.. Cant wait to see it when its done.. and a vid or two //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

It's getting there. It will be a little while before it's completely finished but I'm hoping to have it playing tonight.

 

[thevic24 5,000+ posts]

iam in for vids, been waiting to see this one finished.

//content.invisioncic.com/y282845/emoticons/cool.gif.3bcaf8f141236c00f8044d07150e34f7.gif

 

[mlstrass 5,000+ posts]

Kevin didn't have to be nervous since I was the one doing the cutting LOL

Was nice to meet up with you. Looking forward to hearing this set up when it's done. Just silicone the shit out of the boot and it'll seal up just fine.

And I can help you seal it off if you run into trouble and I'd do the "speaker grill" like I had for my trunk box.

2 AC/DC songs and I had a headache, I'm getting old....

 

[KHARPS 10+ year member]

Kevin didn't have to be nervous since I was the one doing the cutting LOL
Was nice to meet up with you. Looking forward to hearing this set up when it's done. Just silicone the shit out of the boot and it'll seal up just fine.

And I can help you seal it off if you run into trouble and I'd do the "speaker grill" like I had for my trunk box.

2 AC/DC songs and I had a headache, I'm getting old....

Haha yeah man it was a fun day...I could have sat on your couch all day watching those concerts if I didn't have this to do. I've been out in the garage since 3:30 (besides taking a few breaks here and there) working on this **** thing. I got it playing a few min ago but didn't really turn it up, I was just making sure the amp turned on and everything since I hadn't used it yet. I'll silicon the shit out of it tomorrow and I also have to find some expanding foam to seal off around the box. Then I'll get to making a panel for the back wall and I'll go ahead and order some speaker grill. I have to rig something up to for my 2-channel to mount to too. Long day ahead of me tomorrow! Thanks again for cutting the truck up!

 

[Cameron_B 10+ year member]

Your setup sounds pretty similar to a few I had in mine but I had a JL 1000/1 and then switched to a saz1500. I remember you had a 3'' aero firing into the passenger corner, is it still the same with this setup?

New box is a slot port firing to passenger side

port is 1.5x10 inches

 

[headlesskoopa 10+ year member]

looks good

 

[TnT_Sounds 10+ year member]

I've always wanted to see somebody do a big *** bandpass setup in a cut thru...all the woofers in the bed ported through the cut thru

Mine will soon have 10 15's If i can fit them.. which im sure i can.//content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif In a 4th order and ported through into the cab. All you'll see is the tiny peep hole like my current box

 

[KHARPS 10+ year member]

New box is a slot port firing to passenger side
port is 1.5x10 inches

Nice, got any pics/vids posted?

looks good

Thanks man.

Mine will soon have 10 15's If i can fit them.. which im sure i can.//content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif In a 4th order and ported through into the cab. All you'll see is the tiny peep hole like my current box

That will be *******.

 

[Cameron_B 10+ year member]

Nice, got any pics/vids posted?

Thanks man.

That will be *******.

Not yet havent even got the new PSI recone broken in yet. Will have them soon though along with t a couple pics and hopefully some numbers.

Old Setup did a 139.7 on a Sundown Sae-1200 at 52hz I am hoping for atleast a 142 outa this setup.