MikeyB
5,000+ posts
CarAudio.com Addict ®
Ive got another thread already on the whole build thus far, but I wanted some additional input on the enclosure design so far.
Other thread can be viewed here
Going to be installed something like this, although it will probably look much different when its all said and done.
Heres the design so far
Currently its 9.7 cube tuned to 32hz with 110sq in of port. 8 cube after displacement. The front will consist of about 4 baffles and the port will be interchangeable.
The enclosure will be constructed partially in the trunk, it will slide out into the car partially. Then additional baffles will be secured onto a floor base and rear deck extension (Beauty Panels) which will also hold everything in place. If that makes sense to anyone //content.invisioncic.com/y282845/emoticons/confused.gif.e820e0216602db4765798ac39d28caa9.gif
Input? Suggestions?
Other thread can be viewed here
Going to be installed something like this, although it will probably look much different when its all said and done.
Heres the design so far
Currently its 9.7 cube tuned to 32hz with 110sq in of port. 8 cube after displacement. The front will consist of about 4 baffles and the port will be interchangeable.
The enclosure will be constructed partially in the trunk, it will slide out into the car partially. Then additional baffles will be secured onto a floor base and rear deck extension (Beauty Panels) which will also hold everything in place. If that makes sense to anyone //content.invisioncic.com/y282845/emoticons/confused.gif.e820e0216602db4765798ac39d28caa9.gif
Input? Suggestions?