junk *** enclosure build mt10 and mm2000.1

[tommyk90 5,000+ posts]

pounds like mad, loudest 10 i have ever experienced, it's quiet outside, gotta love that deadener, pics tomorrow, i am dead tired today.
the MT10 has a bad recone job on it, the dood didn't know too much about reconing, and tried a MT as a first one i guess? must not have known how tight it needs to be.

coil rubs on one side, goes away if you hold right above the E, so i inverted the woofer and screwed it down so the baffle is holding above the E, sounds alright, distorts at volume.

chevyaudio: mr. basket does not meet mr. cone, ever, and i wired it to .75 ohms so it should be getting ~2000watts.

the spider is actually the same size as the cone so in order for it to make contact with the basket, it would have to destroy the spider first.

problems as of now: 11.1 volts. :/ blows, need to get me a yellow top and some big three action.

maybe a h/o alt, //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

SHOULD BE and ACTUALLY are two completely different things. //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

Besides, 2000 watts isn't a lot of power for a freshly reconed MT anyways. //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[mikescanlon 10+ year member]

SHOULD BE and ACTUALLY are two completely different things. //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif
Besides, 2000 watts isn't a lot of power for a freshly reconed MT anyways. //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

yeah, with 11ish volts, i am not even dreaming about 2kw's... soon enough.

ordered this 350 dollar battery today with 2150ca, should get me somewhere where i need to go, and 2 more runs of zero gauge.

 

[spike_e 10+ year member]

yea voltage drop is a *****. i have the set up in my sig and unless my gain is almost all the way down im hittin around 11.2 and at 10.6 on heavy bass notes.

 

[tommyk90 5,000+ posts]

yeah, with 11ish volts, i am not even dreaming about 2kw's... soon enough.
ordered this 350 dollar battery today with 2150ca, should get me somewhere where i need to go, and 2 more runs of zero gauge.

Now you're talking. //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[mikescanlon 10+ year member]

Now you're talking. //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

http://www.odysseybatteries.com/battery/pc2150.htm

yeah man, anyone have any reviews on these? if it stands up to it's stats, i dont think i'll have anymore voltage issues.

coolest thing to me is there is no limit on intake voltage, so you can pump 500amps into it, and it wont get hurt.

if only i could find a H/o alt for my truck. interested if anyone is selling one for a 4 banger colorado.

 

[tommyk90 5,000+ posts]

http://www.odysseybatteries.com/battery/pc2150.htm

yeah man, anyone have any reviews on these? if it stands up to it's stats, i dont think i'll have anymore voltage issues.

coolest thing to me is there is no limit on intake voltage, so you can pump 500amps into it, and it wont get hurt.

if only i could find a H/o alt for my truck. interested if anyone is selling one for a 4 banger colorado.

Those are VERY good batteries. Used by quite a few DB drag competitors.

 

[Chevyaudio 5,000+ posts]

Yup @ 11.1 volts I highly doubt you were getting 2kw.

 

[mikescanlon 10+ year member]

Yup @ 11.1 volts I highly doubt you were getting 2kw.

this amp is a monster if i was, 1 cube box is almost done.

 

[mikescanlon 10+ year member]

10 inch mt for trade, looking for more SQ orienented setup than this, man, i didn't think they made woofers that sounded this bad. it pounds rediculously loud, but wow, it sounds soo bad. very inaccurate. gonna bring it to my local RE dealer for a checkup and make sure it's even in good condition.

should be this was a "new" woofer when i bought it.

beginning to think someone ***** the crap out of this thing.