is this decent 1/0?

[Chevyaudio 5,000+ posts]

dammn you counted all the strands....lol. and 625 isnt alot at all...most 1/0 is in at least the 4500 range. Knu Kollosus is 5k+

 

[geat 10+ year member]

dammn you counted all the strands....lol. and 625 isnt alot at all...most 1/0 is in at least the 4500 range. Knu Kollosus is 5k+

rofl yeah, i got bored for 10 minutes //content.invisioncic.com/y282845/emoticons/uhoh.gif.c07307dd22ee7e63e22fc8e9c614d1fd.gif

 

[ngsm13 5,000+ posts]

dammn you counted all the strands....lol. and 625 isnt alot at all...most 1/0 is in at least the 4500 range. Knu Kollosus is 5k+

Most 1/0 is in the 3k range...

//content.invisioncic.com/y282845/emoticons/fyi.gif.9f1f679348da7204ce960cfc74bca8e0.gif

nG

 

[skadude016 5,000+ posts]

Most 1/0 is in the 3k range...
//content.invisioncic.com/y282845/emoticons/fyi.gif.9f1f679348da7204ce960cfc74bca8e0.gif

nG

ya but the strands are finer

 

[knukonceptz 10+ year member]

Without knowing the gauge of strand....If 28 gauge strands you have 1 Gauge (nearly 1/0, about 10% under AWG) If 30 gauge strands you have standard 2 gauge.

This is all based on 625 strand count, usually rope lay is based on ropes, you have X amount of ropes with Y amount of strands. Counting one rope for its strands and then mulitple by number of ropes to get the exact number.

 

[lrgnation 10+ year member]

**** you counted the strands...wtf!

 

[geat 10+ year member]

Without knowing the gauge of strand....If 28 gauge strands you have 1 Gauge (nearly 1/0, about 10% under AWG) If 30 gauge strands you have standard 2 gauge.
This is all based on 625 strand count, usually rope lay is based on ropes, you have X amount of ropes with Y amount of strands. Counting one rope for its strands and then mulitple by number of ropes to get the exact number.

i measured the strands they are .010 of an inch //content.invisioncic.com/y282845/emoticons/eyebrow.gif.fe2c18d8720fe8c7eaed347b21ea05a5.gif

 

[djman37 5,000+ posts]

this page has a lot of help for AWG.

http://www.powerstream.com/Wire_Size.htm

 

[geat 10+ year member]

well i got some 2/0 now //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[Lakota 5,000+ posts]

wow that jacket looks thin.

 

[geat 10+ year member]

wow that jacket looks thin.

thats just black tape around it, i can snap a pic of the jacket if you want

 

[knukonceptz 10+ year member]

That would be about a 30 gauge strand

 

[sundownz Pro Seller]

Use the 2/0 wire //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[geat 10+ year member]

Use the 2/0 wire //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

yeah im going to, hopefully it should be more than enough for my 1500, its going to take some finesse to get it into the terminal on it though lol

 

[sundownz Pro Seller]

If you need to you can trim a few strands here and there. The overall wire resistance is still alot lower than a smaller wire, losing a few strands won't hurt anything if it doesn't quite fit //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif Although I'm confident you can make it go in there... my brother got KnuKnoceptz Kolossus into his and I don't imagine that could be any bigger!