Imaspaceguy Private build

[imaspaceguy90 10+ year member]

Ok, got muh wood cut and glue waiting, this is ognna be 2 seperate boxs for L7's.

Pics to come. Plans made by jmanpc

Click to read more...

 

[davidfre21 5,000+ posts]

did i help ya with this design awhile back?

 

[dont_smokerocks 10+ year member]

you know... once it's on the internet it's not private anymore...

 

[iagrdshaka 5,000+ posts]

10" L7s?

 

[imaspaceguy90 10+ year member]

tehre 12" I meant private as in no one is building them for me for a cahnge.

 

[imaspaceguy90 10+ year member]

I didnt, i still have to do the port, the side taht got cutoff in the picture is onyl tehre to make sure the wood is and glued and angled right, i stil ahve to glue the chambers in. only 3 pices are glued so far.

 

[James Bang 5,000+ posts]

cool.. hope this one comes out better than the one you paid for.

 

[mazdakid 5,000+ posts]

shoulda done this from the start when i told you to

 

[imaspaceguy90 10+ year member]

More pics: Sum glue dripped in the box but im gonna get that out,and i had to use pces of wood to keep the wood angle straight.

 

[PV Audio 5,000+ posts]

Is this pelota's first build? //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 

[imaspaceguy90 10+ year member]

yeppers //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[PV Audio 5,000+ posts]

Niiiiiiiiiiiiiiiiiiice. Hope it turns out fo ya.

 

[tRiGgEr 5,000+ posts]

To bad that box design is WRONG:crap:

Edit -

Here is what was designed wrong.

Did not account for port material displacement, port end correction, proper port displacement volume, and proper port measurement. Did not use NET volume for finding port length. So this adjusted the enclosure volume/tuning.

 

[tRiGgEr 5,000+ posts]

Congratulations on your 1.5ft^3 box tuned to 38.7hz before driver displacement...

 

[rocky 59 5,000+ posts]

pwned