Xprime4
10+ year member
****in' canadian
have them installed since about a week. Door are deadened , tweeters in a pillar, woofer bottom of door, angled. The distance between the two doesn't really affect me since the imaging still is good.
So far, the midbass really impress me. I used to high pass my cdt cl-6 at around 120hz @ 300 watt. The ctx65cs does the job down to 80hz!!! the midbass is beefy and play nice. Mids are comparable to the cdt set, a little smoother with then cl-6 and a little quieter... but it's loud anyway
Tweeters is a bit of a deception. First thing, it's not as smooth as I tough it would be. I did some cut around 6k with my eqs. I just can't get want i loved so much about the cdt-tw25. It was so much smoother and much more detailed. I'm thinking about keeping the midbass and swapping the tweeter but got few questions...
-What is the ctx65cs included crossover Crossed at? i know it's a 6db sloppe but where? 3k or lower?
-Would it be ok if i swapped the crossover too for the one that come with vc-100 set ? (12db sloppe @3k)
I'll still try to give it some playing time , maybe crossover do break in... vc-100 are well known to get better with time.
BTW they are off-axis , pointing at the windshild in a pillar. I would like to try the tw-25 with the midbass of the ctx65cs but just don't want to blow anything with bad crossing point
thank you
The set got me interrested in Id subwoofer btw, they must sound awesome!
So far, the midbass really impress me. I used to high pass my cdt cl-6 at around 120hz @ 300 watt. The ctx65cs does the job down to 80hz!!! the midbass is beefy and play nice. Mids are comparable to the cdt set, a little smoother with then cl-6 and a little quieter... but it's loud anyway
Tweeters is a bit of a deception. First thing, it's not as smooth as I tough it would be. I did some cut around 6k with my eqs. I just can't get want i loved so much about the cdt-tw25. It was so much smoother and much more detailed. I'm thinking about keeping the midbass and swapping the tweeter but got few questions...
-What is the ctx65cs included crossover Crossed at? i know it's a 6db sloppe but where? 3k or lower?
-Would it be ok if i swapped the crossover too for the one that come with vc-100 set ? (12db sloppe @3k)
I'll still try to give it some playing time , maybe crossover do break in... vc-100 are well known to get better with time.
BTW they are off-axis , pointing at the windshild in a pillar. I would like to try the tw-25 with the midbass of the ctx65cs but just don't want to blow anything with bad crossing point
thank you
The set got me interrested in Id subwoofer btw, they must sound awesome!