Image Dynamics CTX65CS - Image Dynamics 6.5"

[Xprime4 10+ year member]

yeah check out the phase with a 9v battery

 

[Kicker1984 10+ year member]

keep this in mind, the factory speakers are playing more then just midbass when installed by the factory. they are also trying to play the low freqs. so what you may think is "midbass" could be the low freqs trying to play through the speakers too.

Yeah im aware of the stock speakers playing more than midbass. But im pretty sure that my system lacks the midbass.

My toms and floor toms sound so muffled. You cant hear them as clear as my g.fs stock 09 camry's.

The sound quality is much better in my truck, but its lacking in that range. Ive tried everything, even spent money on re wiring my speakers and making sure everything is installed correctly. //content.invisioncic.com/y282845/emoticons/crap.gif.7f4dd41e3e9b23fbd170a1ee6f65cecc.gif

 

[Xprime4 10+ year member]

After more than a month of use, I decided to lower the hpf a little just for fun. Hell they're playind down till around 60hz @ 300watt //content.invisioncic.com/y282845/emoticons/wow.gif.23d729408e9177caa2a0ed6a2ba6588e.gif

My manual door handles aren't happy, what could i do? otherwise, i'm leaving my subs off just to feel that midbass/bass and i love it.

Deflex pad will be needed soon if i want to get the hpf that low. Jeezy excessive bass distort a little @ full tilt

 

[Xprime4 10+ year member]

btw, the excursion is real nice, Kicker1984 do you still have excursion problems?

 

[Kicker1984 10+ year member]

Talk about bringing back an older thread.

How can i tell if one of my tweeters are blown? They sound good with some songs but i can hear crackling in others, Is my gain to high maybe?

Also, looking to find out if my polarity is correct, any tips on how to do this with components? Thanx

 

[Horsemanwill 10+ year member]

copper colored wire is +

are you using the passive xover that came with it or are you active? what's the xover set at and how high is the gain.

 

[Kicker1984 10+ year member]

using the passive xover that came with components.

xover on amp is set to 100, and gain 1/4.

Usually the wire with the line is negative or positive?

 

[Horsemanwill 10+ year member]

there's shouldn't be a line on the tweeter wire there sh ould be a copper and a silver wire the copper is positive as for the extension wire it's wat evr you make it

 

[Kicker1984 10+ year member]

gotcha, will look into it tonight.