I'm inFInitely Baffled.

[shavenblazer 10+ year member]

Is that peal and seal on your roof???

 

[SRim23 5,000+ posts]

gah stuff like this makes me wish I had a car with a trunk, instead of an open hatch.

i think that if i had the install you had id finally be happy....thatd be the best setup for me anyways.....

 

[req 5,000+ posts]

there are a lot more than what njbass has //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

imo - his front stage is quite aggressive. i like it //content.invisioncic.com/y282845/emoticons/tongue.gif.6130eb82179565f6db8d26d6001dcd24.gif tons of midbass and easily enough volume. my midbass is way more mellow than his but about as loud. its hard to elaborate on the highs because they are completely different ends of the spectrum and my horns are currently un-eq'd because im lazy.

but i like the edge i hear when listening to those dyn 8's.

cant wait to hear them focals when i pass through nj around december. it will be interesting. hopefully he can get some other audio buddies that he has to listen to both cars with the same material and give us some third party observations.

 

[James Bang 5,000+ posts]

Is that peal and seal on your roof???

no sir, that would be edead v.something.

there are a lot more than what njbass has //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

imo - his front stage is quite aggressive. i like it //content.invisioncic.com/y282845/emoticons/tongue.gif.6130eb82179565f6db8d26d6001dcd24.gif tons of midbass and easily enough volume. my midbass is way more mellow than his but about as loud. its hard to elaborate on the highs because they are completely different ends of the spectrum and my horns are currently un-eq'd because im lazy.

but i like the edge i hear when listening to those dyn 8's.

cant wait to hear them focals when i pass through nj around december. it will be interesting. hopefully he can get some other audio buddies that he has to listen to both cars with the same material and give us some third party observations.

get to tuning and get 'er done. how are you gonna have cd2 horns and not tune them??? bastid.

 

[James Bang 5,000+ posts]

more eDead, more progress. //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

and my trusty guard dog.

 

[req 5,000+ posts]

ill tell you what. using the liquid over the mat really REALLY helps the stuff stick better. im not sure why, but my buddy has tons of edead mat on his trunk lid and it was peeling off. he got some of the black liquid and painted it on top, and the stuff is solid as a rock.

that stuff will treat you well - trust me //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

and ill get er tuned soon. check this out;

Part Number In Stock Description Qty. Price Ext. Price Remove

080-512 Yes Cable Tie Screw Mount 10 Pcs. .. $2.25 $33.75

080-640 Yes 12mm Heat Shrink 3:1 Black 6" x 4 Pcs. .. $2.50 $15.00

080-644 Yes 12mm Heat Shrink 3:1 Blue 6" x 4 Pcs. .. $2.50 $15.00

080-650 Yes 18mm Heat Shrink 3:1 Black 6" x 3 Pcs. .. $2.95 $8.85

080-654 Yes 18mm Heat Shrink 3:1 Blue 6" x 3 Pcs. .. $2.95 $8.85

080-812 Yes Cable Ties 5-1/2" Black 100 Pcs. .. $2.65 $5.30

091-1150 Yes Gold Binding Post Pair .. $5.45 $21.80

092-112 Yes Neutrik NYS352G RCA Plug Gold .. $1.09 $20.71

100-225 Yes Dayton MSC-100 Microphone/Signal Cable .. $45.72 $45.72

082-328 Yes Techflex 1/4" Expandable Sleeving 25 ft .. $6.42 $25.68

082-360 Yes Techflex 1/2" Expandable Sleeving 25 ft .. $12.30 $36.90

091-350 Yes Gold Plated Crimp-On Banana Plug 16 Pcs .. $24.00 $24.00

263-609 No StreetWires CBR44S AFS Combo Fuse Block .. $64.89 $64.89

Subtotal: $326.45

thats not including the 4 guage flecks im going to order from knu.

 

[Megalomaniac 5,000+ posts]

ill tell you what. using the liquid over the mat really REALLY helps the stuff stick better. im not sure why, but my buddy has tons of edead mat on his trunk lid and it was peeling off. he got some of the black liquid and painted it on top, and the stuff is solid as a rock.
that stuff will treat you well - trust me //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

and ill get er tuned soon. check this out;

thats not including the 4 guage flecks im going to order from knu.

req, checkout http://www.wirecare.com when you get a chance. they have ally our wire management needs at reasonable prices.

Their heat shrink is supose to be very top knotch, 3:1 is the way to go, i see you got that covered though //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[req 5,000+ posts]

req, checkout http://www.wirecare.com when you get a chance. they have ally our wire management needs at reasonable prices.
Their heat shrink is supose to be very top knotch, 3:1 is the way to go, i see you got that covered though //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

as far as i can tell PE prices are better //content.invisioncic.com/y282845/emoticons/confused.gif.e820e0216602db4765798ac39d28caa9.gif

 

[Megalomaniac 5,000+ posts]

as far as i can tell PE prices are better //content.invisioncic.com/y282845/emoticons/confused.gif.e820e0216602db4765798ac39d28caa9.gif

more variety

 

[req 5,000+ posts]

meh. all i need is blue and black and im set. so no biggie. but thanks for the linkie.

and james, as far as the power wire goes, just ziptie it to the bundle of wires on its left. thats what we did with gcadiddas' camry. works like a charm...

 

[James Bang 5,000+ posts]

will do.

x2 on the liquid stuff over the mat. That's kind of why i went with this cheapo stuff i got from HD. I'm using the cheap stuff on my rear door panels right now. I'm like the energizer bunny on meth tonight.

I see lots of good stuff on that list of yours. Make sure to make a thread w/ a bunch of pictures 'cause I need to learn how to make my own RCAs. That's the only way to go if one wants to have some sexy wire management.

 

[req 5,000+ posts]

will do.
x2 on the liquid stuff over the mat. That's kind of why i went with this cheapo stuff i got from HD. I'm using the cheap stuff on my rear door panels right now. I'm like the energizer bunny on meth tonight.

I see lots of good stuff on that list of yours. Make sure to make a thread w/ a bunch of pictures 'cause I need to learn how to make my own RCAs. That's the only way to go if one wants to have some sexy wire management.

trust me james. im going in depth with this bullisht. there will be somone over my shoulder the whole time snapping photos. im debating weather to put it on the credit card meow and get on with it or wait until i get back from tampa (navy is sending me there next weekend for 11 days)

ill have another paycheck by then. and hopefully my new big belle. (shh dont tell anyone!)

i might order the stuff while im down there. we shall see. but ill send you a PM with the link. you can get at me on aim. ill pm you my sn. but right now its time for bed. ttyl guys.

 

[James Bang 5,000+ posts]

after registering to diyma and checking out those install threads.. i had to step up my game... but still i'll probably never get up to that level, partly because i'm too broke.//content.invisioncic.com/y282845/emoticons/crap.gif.7f4dd41e3e9b23fbd170a1ee6f65cecc.gif

 

[MTXThunder9500 10+ year member]

I think I might just leave it how it is...

The vent was an air vent. When i had my ported box in the trunk you can hear the vent flapping due to the pressure. It had a rubber layer to allow air to escape but not enter the trunk

sounds like the same type of vent that mine is. How did you seal it off?

 

[James Bang 5,000+ posts]

w/ a grip load of expanding foam.