I want a single amp setup! Any input?

[sqhertz 5,000+ posts]

pm 6spdcoupe ( i think thats who it is) to get a price...

 

[BASS_WARRIOR 10+ year member]

I think I got a quote from him before. He gave me a good price, I would have to save for a little while for that tho.

 

[dragnix 5,000+ posts]

just go with a multi amp setup. I was going to do a single amp also, but decided to say fuck it and bought 3 //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 

[BASS_WARRIOR 10+ year member]

just go with a multi amp setup. I was going to do a single amp also, but decided to say fuck it and bought 3 //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

LMAO. What did your A.D.D. kick in while searching for one?

 

[dragnix 5,000+ posts]

more like O.C.D

 

[BASS_WARRIOR 10+ year member]

yeah that stuffs a bitch

 

[dragnix 5,000+ posts]

it happens, first step is to admitting that i have it //content.invisioncic.com/y282845/emoticons/fyi.gif.9f1f679348da7204ce960cfc74bca8e0.gif

 

[Tehgregzor 10+ year member]

I really liked my 5 chan amp. plus it was 1 ohm stable, putting out 600 to the sub.

 

[BASS_WARRIOR 10+ year member]

What amp was that?

 

[iwannatt 10+ year member]

NINE.5 is 1ohm stable 600w to the sub, bandpass crossovers

4X100@ 4ohm +250@4ohms

4X175@2ohms +450@2ohms

+600@1ohm

those specs are at 12.5v and 0.05 % THD, so you should see a little more than that.

I have been using this amp for about a month and all I can say is that its a nice amp, powerful very adjustable.

 

[BASS_WARRIOR 10+ year member]

NINE.5 is 1ohm stable 600w to the sub, bandpass crossovers4X100@ 4ohm +250@4ohms

4X175@2ohms +450@2ohms

+600@1ohm

those specs are at 12.5v and 0.05 % THD, so you should see a little more than that.

I have been using this amp for about a month and all I can say is that its a nice amp, powerful very adjustable.

Already been stated in the thread bro, you can't find them other then used now.

 

[CrossFired 10+ year member]

I want to stick with running just a single amp in my next setup.
My setup will consist of a set of 6.5" Massive audio CK6 comps up front and my MKI Brahma(d2) in a 3.5cft enclosure tuned to 35hz. I have the big three done under the hood with just a regular duralast bettery:crap:. I plan on getting a Kinetik HC600 for the back.

Now I'm looking for an amp that can do between 100-150w to the comps, and AT LEAST 600w to the Brahma. Right now I'm looking at the Cadence TXA-6004 . I don't care if it's a 3,4, or 5 channel amp as long as it fits my power needs. What suggestions do you guys have?

You could try one of these.

http://cgi.ebay.com/PIONEER-PRS-D4200F-1200W-4-CHANNEL-AMPLIFIER-AMP-NEW_W0QQitemZ380054600531QQcmdZViewItem?hash=item380054600531&_trkparms=72%3A1071%7C39%3A1%7C66%3A2%7C65%3A12%7C240%3A1318&_trksid=p3286.c0.m14

I've install them a few times and they have lots of power are very clean, run cool and are not real big.//content.invisioncic.com/y282845/emoticons/veryhappy.gif.fec4fed33b4a1279cf10bdd45a039dae.gif