I want a single amp setup! Any input?

[BASS_WARRIOR 10+ year member]

I want to stick with running just a single amp in my next setup.

My setup will consist of a set of 6.5" Massive audio CK6 comps up front and my MKI Brahma(d2) in a 3.5cft enclosure tuned to 35hz. I have the big three done under the hood with just a regular duralast bettery:crap:. I plan on getting a Kinetik HC600 for the back.

Now I'm looking for an amp that can do between 100-150w to the comps, and AT LEAST 600w to the Brahma. Right now I'm looking at the Cadence TXA-6004 . I don't care if it's a 3,4, or 5 channel amp as long as it fits my power needs. What suggestions do you guys have?

Click to read more...

 

[Buck 5,000+ posts]

nine.5

 

[ryanj91 10+ year member]

i dont know the specs on the larger memphis belle, but i think it was at least 600 w on ch 5...

edit: new name is the hybrid, it'll do 230 x 2 @ 2 ohm and 1100 x1 @ 1 ohm

http://www.memphiscaraudio.com/amp_specs/16-mc5info.html

 

[DaGh0st 5,000+ posts]

nine.5

Just a little while ago they had them on sale.

 

[lilmaniac2 5,000+ posts]

eduh ftl

im personally looking into the alpine pdx 5

 

[wu501 10+ year member]

this rockford might be something to look at..I've heard good things about them.

http://cgi.ebay.com/ROCKFORD-FOSGATE-POWER1000-AMP-5-4-3CH-1400W-AMPLIFIER_W0QQitemZ110279419946QQihZ001QQcategoryZ18795QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

Front/Rear Channels

50W x 4 @ 4-Ohms RMS

100W x 4 @ 2-Ohms RMS

150W x 4 @ 1-Ohm RMS

200W x 2 @ 4-Ohms Bridged Mono

300 x 2W @ 2-Ohms Bridged Mono

Sub Channel

300W x 1 @ 4-Ohms RMS

600W x 1 @ 2-Ohms RMS

800W x 1 @ 1-Ohm RMS

 

[BASS_WARRIOR 10+ year member]

nine.5

I couldn't find them on the site anymore...

 

[BASS_WARRIOR 10+ year member]

i dont know the specs on the larger memphis belle, but i think it was at least 600 w on ch 5...
edit: new name is the hybrid, it'll do 230 x 2 @ 2 ohm and 1100 x1 @ 1 ohm

http://www.memphiscaraudio.com/amp_specs/16-mc5info.html

I wonder what the price tag is on that beauty....

I'm still kinda iffy on eD. Plus didn't Adire and eD hate each other? I'd feel dirty combining the two:laugh:

 

[n2audio 5,000+ posts]

Massive P800.4?

 

[BASS_WARRIOR 10+ year member]

Massive P800.4?

I was actually looking at getting that amp from another member, but that would only run 400w to the brahma //content.invisioncic.com/y282845/emoticons/crap.gif.7f4dd41e3e9b23fbd170a1ee6f65cecc.gif

 

[Buck 5,000+ posts]

I couldn't find them on the site anymore...

i know but you might be able to get a used one

 

[thegreatestpenn 5,000+ posts]

a Rockford power series 4-channel. The t600-4 comes to mind or the big t8004. Should give you close to the power you want if not more to the brahma and more than enough for the comps

 

[n2audio 5,000+ posts]

I was actually looking at getting that amp from another member, but that would only run 400w to the brahma //content.invisioncic.com/y282845/emoticons/crap.gif.7f4dd41e3e9b23fbd170a1ee6f65cecc.gif

I couldn't nail down the power ratings, but it looked like 200x4 at 4 -- I was guessing ~300 @ 2/600x1, but judging by ampguts 100x4/200x4 does seem more likely.

 

[BASS_WARRIOR 10+ year member]

a Rockford power series 4-channel. The t600-4 comes to mind or the big t8004. Should give you close to the power you want if not more to the brahma and more than enough for the comps

Yeah Im looking at the 8004 as well. Im so pissed there was an 8004 on ebay that went off for only $185 or something, and I missed it:verymad://content.invisioncic.com/y282845/emoticons/furious.gif.fc81ca146dbff91fede3ed290dbc4f4c.gif//content.invisioncic.com/y282845/emoticons/verymad.gif.3f39c5c2fd57527b671fad3efdfac756.gif

 

[BASS_WARRIOR 10+ year member]

Opinions on this amp?