Mike437 10+ year member
Senior VIP Member
So about 2 weeks ago i had bought everything i had needed to install my subs: amp, box, install kit etc. but since back then i did not know how to install all of that i took it to my friends brothers shop, his brother is the owner. I figured they knew what they were doing and i got it all installed 50% off, only 70 bucks for the install. I explained to the installer i wanted the subs wired down to 1 Ohm, and he thought i was crazy. I then explained to him how my amp can handle 1 Ohm and he sayed ok fine. I also purchased extra 4 gauge wire to get the big 3 done, i told him to do that for me and he did not know what the big 3 was!//content.invisioncic.com/y282845/emoticons/wow.gif.23d729408e9177caa2a0ed6a2ba6588e.gif so i told him it was battery to alt, battery to ground, and alt to ground. So he said he would do that.
Today, as i was showing my subs off to my friends, noticed that my subs hit hard but my buddy who had a 15" rockford p2 in a ported getting 800w rms was hitting a little bit harder than me!//content.invisioncic.com/y282845/emoticons/confused.gif.e820e0216602db4765798ac39d28caa9.gif So when i got home from school today i popped the hood and noticed that the installer only re-grounded my battery and nothing else dealing with the big 3. I also noticed that he ran the power wire and the rca cables on the same side! Now i thought it is never good to do that! Also, i have noticed a smell of something not really burning but an akward smell. But the pics are below of my car, amp, head unit, etc. But what should i do? I think this weekend i will re-wire the rca to the left of the car, and actually do the big 3 finally, but how do i know for sure if my subs are wired to a 1 Ohm load? I mean if they messed all of this up it is possible they screwed up the wiring!
One last thing, i notice that if i start my car and play the subs at say 20/65, then 30/65, then 45/65 progressively then my subs seem to hit harder as compared to just starting the car up and cranking it up to 50/65. Does this sound right?
Thanks in advance,
Mike
Pics:
Today, as i was showing my subs off to my friends, noticed that my subs hit hard but my buddy who had a 15" rockford p2 in a ported getting 800w rms was hitting a little bit harder than me!//content.invisioncic.com/y282845/emoticons/confused.gif.e820e0216602db4765798ac39d28caa9.gif So when i got home from school today i popped the hood and noticed that the installer only re-grounded my battery and nothing else dealing with the big 3. I also noticed that he ran the power wire and the rca cables on the same side! Now i thought it is never good to do that! Also, i have noticed a smell of something not really burning but an akward smell. But the pics are below of my car, amp, head unit, etc. But what should i do? I think this weekend i will re-wire the rca to the left of the car, and actually do the big 3 finally, but how do i know for sure if my subs are wired to a 1 Ohm load? I mean if they messed all of this up it is possible they screwed up the wiring!
One last thing, i notice that if i start my car and play the subs at say 20/65, then 30/65, then 45/65 progressively then my subs seem to hit harder as compared to just starting the car up and cranking it up to 50/65. Does this sound right?
Thanks in advance,
Mike
Pics: