i need a box design please

[VisceralSound 10+ year member]

ok cool show me your ideas of boxes

I'm sure whatever Jason suggests will be excellent.

 

[CHRIS 323 10+ year member]

I'm sure whatever Jason suggests will be excellent.

cant wait to see im excited

 

[UnderFire 10+ year member]

Gave it a shot for practice...

4.5 Cubes per chamber, tuned to 32hz with 3 inch slot ports. Designed for dual 3/4" Baffle.





No clue if it's right or not, you'll be better off with a pro's design.

 

[winkychevelle 10+ year member]

Gave it a shot for practice...
4.5 Cubes per chamber, tuned to 32hz with 3 inch slot ports. Designed for dual 3/4" Baffle.





No clue if it's right or not, you'll be better off with a pro's design.

awesome design rendering but airspace is a huge constraint seeing as this box is sized more along the lines of 15 territory.

op u might need to run 15s or give up more height to gain airspace

 

[UnderFire 10+ year member]

awesome design rendering but airspace is a huge constraint seeing as this box is sized more along the lines of 15 territory.
op u might need to run 15s or give up more height to gain airspace

Thanks.

I don't think it will work either, 4.5 cubes is kind of a strange measurement, it's too much for most 15's and not enough for almost any 18.

You'll need to figure out what you want to do, but I wouldn't run 18's unless you can find at least another cubic foot per side.

 

[CHRIS 323 10+ year member]

can you sketch the exact same box in the pic but with my measurements W43 x D30 x H22 tuned at 32Hz???

 

[UnderFire 10+ year member]

can you sketch the exact same box in the pic but with my measurements W43 x D30 x H22 tuned at 32Hz???

Done.

Comes out to 10.8 Cubes Net @ 32hz, 10 inch square port, 16 inches deep. I added vertical bracing, but lateral would probably be needed as well. Once again, double 3/4" baffle.

 

[CHRIS 323 10+ year member]

Done.
Comes out to 10.8 Cubes Net @ 32hz, 10 inch square port, 16 inches deep. I added vertical bracing, but lateral would probably be needed as well. Once again, double 3/4" baffle.

sweet bro thanks but FI recommends 6 cubic feet per sub right ????

 

[UnderFire 10+ year member]

sweet bro thanks but FI recommends 6 cubic feet per sub right ????

I believe the minimum they have posted it 5 per, but even at 6 I think you would still be mechanically limiting the sub, 7-7.5 would probably be optimal.

 

[twistedchild420 5,000+ posts]

Go prefab

 

[CHRIS 323 10+ year member]

I believe the minimum they have posted it 5 per, but even at 6 I think you would still be mechanically limiting the sub, 7-7.5 would probably be optimal.

whats the best thing to do i want it for SPL

 

---------- Post added at 02:22 AM ---------- Previous post was at 02:22 AM ----------

 

Go prefab

prefab ????????

 

[UnderFire 10+ year member]

whats the best thing to do i want it for SPL

My knowledge is SQ based, so if I were to tell you anything about an SPL box, it would be a complete guess.

 

[twistedchild420 5,000+ posts]

Yes a pro box or A-trend. A lot more cost effecient and likely louder.

 

[twistedchild420 5,000+ posts]

My knowledge is SQ based, so if I were to tell you anything about an SPL box, it would be a complete guess.

A complete guess....much like anything else you would tell him

 

[CHRIS 323 10+ year member]

Yes a pro box or A-trend. A lot more cost effecient and likely louder.

can you post a prefab box pic please