I dont need help. I need a Answer

[Louderisbetter1]

ok im not beating around the bush because I've tried to figure this thing out but its just not happening for me.

I Have a 2.7cbft Box (Net Volume) I have 3- 10" Pioneer Premier Champion Pro subs inside of it. It is a Common CHamber Box and I am willing to do 1 or 2 ports.

The Round Port Suggestion for the subwoofers are here (IM sure thats single Chamber suggestions)

0.9cbft 3 x 3.5 (inch)

1.2cbft 2 x 2.5 (inch)

0.6cbft 3 x 7 (inch)

Resonance frequency is 34.7hz

Xmax 11mm

But I have a common chamber because im building under a truck seat and it has alot of bumps and grooves.

There's the manual if that helps any. I just want some suggestion on NET port size HxWxD thanks alot

http://www.pioneerelectronics.com/StaticFiles/Manuals/Car/TS-W2502D2_InstructionManual1120.pdf

Click to read more...

 

[bubbagumper6 5,000+ posts]

You need an answer, not "a answer"

 

[Slo_Ride 5,000+ posts]

You need an answer, not "a answer"

lol

 

[galacticmonkey 5,000+ posts]

Hai.

 

[Louderisbetter1]

You need an answer, not "a answer"

Yes, an answer. Thank you for that. Now do you have an answer for me?

 

[Louderisbetter1]

You need an answer, not "a answer"

No? Then I need you to just STFU and when you're done, could you please GTFO.

Thanks

 

[csu87 10+ year member]

No? Then I need you to just STFU and when you're done, could you please GTFO.
Thanks

i was going to help until that.

 

[Louderisbetter1]

i know im already unregistering i cant take the **** jokes man im askin a simple ass question and people want to joke about the dumb ****. its obvious im fustrated with this **** already he needs to just shut the **** up peace

 

[csu87 10+ year member]

14-16 square inches of port per cubic foot. this info can be found with just a little searching

 

[Maxipads 10+ year member]

No? Then I need you to just STFU and when you're done, could you please GTFO.
Thanks

Lol change your tampon bro... or get a Maxipad

 

[Louderisbetter1]

Lol change your tampon bro... or get a Maxipad

When you get done ****** your moms nutts let me know so I can get some help with this port bro

 

[spltuscon 10+ year member]

Just use 2 full length 4" PSP aeroports (from Parts Express) and it should work good.

 

[Louderisbetter1]

Just use 2 full length 4" PSP aeroports (from Parts Express) and it should work good.

Yeah i've been directed to those ports I was told 4" ports are better for 10 inch subs because 3" and smaller ports can get crowded. I'll have to use an Elbow for the 2 4" because of the depth of my box so I'll look at that one as well thanks alot

 

[Bumpin' Goalie 10+ year member]

2 4's should be plenty. And also, there is plenty of joking and friendly teasing on this forum. Don't get upset easily b/c it'll just add flame to the fire. GL with your ports.

 

[Oneswtredhead 10+ year member]

gl using those 3 10's in such small airspace the pioneer specs are horrid sounding at best //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

just 1 sub in 1.2 ported to their specs sounds horrible and you want to do 3? good luck .

I am speaking from experience too

i had the big 12" 3kw model and it specs were 1.6 iirc and it sounded like **** we did it in 2.5 and it was night and day.

 

[Slo_Ride 5,000+ posts]

No? Then I need you to just STFU and when you're done, could you please GTFO.
Thanks

After this I wouldnt expect much help but...

gl using those 3 10's in such small airspace

this

 

[RAM_Designs 5,000+ posts]

Box is too small, start over or keep them sealed.

 

[power-fanatic07 5,000+ posts]

No? Then I need you to just STFU and when you're done, could you please GTFO.
Thanks

hahaha i lol'd