Hunterw's 87 mazda b2k build *revised*

Werd, ever used this design for musical setup?
I've done dozens upon dozens of enclosures in my truck, and last time I had sub forward, it just didn't seem to perform as well. I might try an enclosure again though in the near future.

How much do you lose from kick to dash?

nG

i lose roughly 5-6 db from dash to kick.depending on variables. //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif used to be 9. but i think making the truck stiffer helped that. i havent tried this design for music yet. its hard to get low tuning out of this design. my port is 11in deep and i still burp at 70hz lol.

i would like to do musical in this truck after she wins a few titles. eventually she will be bagged and just a nice little weekend cruiser

 
Werd, ever used this design for musical setup?
I've done dozens upon dozens of enclosures in my truck, and last time I had sub forward, it just didn't seem to perform as well. I might try an enclosure again though in the near future.

How much do you lose from kick to dash?

nG
you try a down firing port yet?

 
haha. well if i get out my kriss meter i could do 170s right now hahaha. but it will never do a 170 //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif on a TL

 
i lose roughly 5-6 db from dash to kick.depending on variables. //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif used to be 9. but i think making the truck stiffer helped that. i havent tried this design for music yet. its hard to get low tuning out of this design. my port is 11in deep and i still burp at 70hz lol.i would like to do musical in this truck after she wins a few titles. eventually she will be bagged and just a nice little weekend cruiser
Werd. I might try a similar design, but with a larger sized daily box and daily friendly tuning. Obviously it would be considerably taller //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif...

My truck is just that, weekend cruiser. I'm actually contemplating selling my wheels and substage and bagging it now... then doing a system again next year. Who knows.

you try a down firing port yet?
Don't have the room with a proper 2 15's box... would be a wall really. If I head back to 2 12's maybe I'll do downfiring.

nG

 
whew long day, i got the box done, resined the added pieces, ran the threaded rod back in and then got her in the truck. and secured //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

and got the other side of the truck finished primed and painted //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

just need to vacuum out the box, and get the speaker wires hooked up. ugh i forgot to seal mup where the wires run into the cab from the bed (vise versa) so ill try to seal from the outside AND seal off the box as well. hope she does ok.

 
Werd. I might try a similar design, but with a larger sized daily box and daily friendly tuning. Obviously it would be considerably taller //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif...
My truck is just that, weekend cruiser. I'm actually contemplating selling my wheels and substage and bagging it now... then doing a system again next year. Who knows.

nG
does your front end have upper and lower control arms and is your drive-shaft a 1 piece or 2 piece?

 
what happened to 69hz?
barametric pressure?
yes lol. freq depends a myriad on the temp. and humidity. im sure in hobs it will be 71-72. the hotter it is the higher the freq. just like me....//content.invisioncic.com/y282845/emoticons/confused.gif.e820e0216602db4765798ac39d28caa9.gif

 
well got the box in. sorry again for the small pics. stupid phone was being dumb

SSPX1785.jpg


in

SSPX1788.jpg


yeah i know the logos dont line up. but i dont give a ****. i cant even tell you how hard it was to get them in. my arms look emo. nice red lines up and down them

SSPX1789.jpg


yay

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

hunterw

10+ year member
whooodie whoooo
Thread starter
hunterw
Joined
Location
farmington, NM
Start date
Participants
Who Replied
Replies
621
Views
72,431
Last reply date
Last reply from
hunterw
IMG_1882.jpeg

slater

    Oct 4, 2025
  • 0
  • 0
Screenshot_20251004_120904_Photo Translator.jpg

1aespinoza

    Oct 4, 2025
  • 0
  • 0

New threads

Top