How to Wire subs for this amp?

[Joseph K 10+ year member]

Ok, at the moment I'm running a single ported 10" BTL in an underseat box I made. I'm wanting to go to two SSD 12"s in a larger sealed box.

The amp I have is a JBL GTO 1201.1 II: specs: http://www.jbl.com/EN-US/Products/Pages/ProductSupportDetails.aspx?PID=GTO1201.1+II

787W RMS x 1 channel at 4 ohms

• 1114W RMS x 1 channel at 2 ohms

• Dynamic power: 1339W at 2 ohms

What voice coil option would I need to choose on them, and how would I wire them to get ~700W going to each sub?

Also, what if I were to go with 2 of these MB Quart subs instead of the ssd's? They come in dual2 and dual4, which would I need? RWE-304 - MB Quart 12" 1000 Watt Reference Series Subwoofer

Thanks!

Click to read more...

 

[Joseph K 10+ year member]

Would I get either of the subs in dual 2ohm config. and wire them like so? Sorry to make a repetitive thread, I just want to make sure I don't do anything wrong lol.

 

[91caprice 10+ year member]

yeah,get what ever set of subs on a D2 config. so you can wire them at a final load of 2ohms and get the most from your amp(like diagram above)