How does this design look

[JumpinBean23 10+ year member]

2016 dart

3 x sundown sa-10s powered off Skar Skv2 1500.1

I just want to make sure I am not missing anything before I start cutting

Any suggestions or ideas are welcome.

Since I can't seem to get the attachment big enough the dimensions are

16h x 40w x 15d

port 14.5 x 3 x 28 for 43.5 in^2 port area

3.08 cubic feet @33 after baffle and woofer displacements

Click to read more...

 

[BOOMINGRANDPA 5,000+ posts]

sq in. per cf on port looks good.. cf per sub is good for 10's.. u have the skar already?

 

[JumpinBean23 10+ year member]

I do. i know the the thoughts on it, but it is what i have at the moment

 

[BOOMINGRANDPA 5,000+ posts]

I do. i know the the thoughts on it, but it is what i have at the moment

it's not a bad amp tested around 1300rms but what ohm are u gonna run it at with 3 subs?

 

[kr15 5,000+ posts]

Id go bigger. That amp is going to tickle those subs

 

[Slo_Ride 5,000+ posts]

it's not a bad amp tested around 1300rms but what ohm are u gonna run it at with 3 subs?

Hopefully .66

 

---------- Post added at 10:26 PM ---------- Previous post was at 10:25 PM ----------

 

Id go bigger. That amp is going to tickle those subs

And this.

 

[BOOMINGRANDPA 5,000+ posts]

Id go bigger. That amp is going to tickle those subs

yeah that why i asked if he had it and about wiring.. 2 of them be better on that amp.. if he's running at .66 1 idk if skar will do that and 2 thought we could come up with some amps with more power at whatever ohm load he's at., maybe 1.33? skar 2k or xtr 1500 would do good power for those..

 

[Slo_Ride 5,000+ posts]

I'll bet $100 the Skar can handle .66

 

[Papermaker85 5,000+ posts]

2016 dart3 x sundown sa-10s powered off Skar Skv2 1500.1

I just want to make sure I am not missing anything before I start cutting

Any suggestions or ideas are welcome.

Since I can't seem to get the attachment big enough the dimensions are

16h x 40w x 15d

port 14.5 x 3 x 28 for 43.5 in^2 port area

3.08 cubic feet @33 after baffle and woofer displacements

Do deeper than wide if you can..

 

[kr15 5,000+ posts]

The SK line is korean... it will do 0.66

 

[shredder2]

Do deeper than wide if you can..

This^^^IMO... and a little more port won't hurt in case you want to go with a bigger amp... that SK will probably deliver around 14-1500 actual at .66... so... I can model it if you'd like

 

[JumpinBean23 10+ year member]

Feel free to model it if you like, I just don't have the electrical side upgraded yet, so I'm not sure how much it will like that lol. I have not had much luck finding a H.O. alt, so a second battery may be my only option. I haven't ruled out just doing 2, I just have them so i figured i would use them. Honestly it would save space which unfortunately I need to have some left when I'm done. Maybe that is a better way to go?

 

[shredder2]

Feel free to model it if you like, I just don't have the electrical side upgraded yet, so I'm not sure how much it will like that lol. I have not had much luck finding a H.O. alt, so a second battery may be my only option. I haven't ruled out just doing 2, I just have them so i figured i would use them. Honestly it would save space which unfortunately I need to have some left when I'm done. Maybe that is a better way to go?

You still planning to run that amp at .66 ohm?

 

[shredder2]

I'll look at two if you want... 1 ohm into 2 subs with that amp might be perfect... 3 subs or 2?

 

[Boomin_tahoe 5,000+ posts]

Shredder2=shredder1?!