how do you install a blow thru?

[pro-rabbit 5,000+ posts]

just keep the piece u cut off n weld it back later if u need to

yep exactly....not to hard to do..

 

[RAM_Designs 5,000+ posts]

just keep the piece u cut off n weld it back later if u need to

This.

I had a pretty big fole in my truck when I did a blow-through...hole was about 3ft wide and a foot or so tall.

 

[pro-rabbit 5,000+ posts]

This.

I had a pretty big fole in my truck when I did a blow-through...hole was about 3ft wide and a foot or so tall.

So if you are mathematically challenged that is around 8-9ft of boot needed. //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 

[akheathen Premium Member]

i know this thread is a month old, but i'll throw my experience in since i have done the exact setup......... only thing, i used a full crawl-through on my 86 yota. original first release L7-15's in a chambered 12cu. vented box. the double-blade wipers were bouncing 1/2" off the windshield, and the sunroof moved 1.5".......all off a mere soundstream 1000sx 142.1db @ 27hz (which was what i was going for at the time, btw).....there is huge potential in the "music" level...... in blow-through reversal, i have re-welded the old piece, and simply installed new sheets