How do i set my amp knobs?

[jokersace69]

Just upgraded my subwoofer and enclosure.

I'm still waiting for my custom box and subwoofer to arrive, in the meantime though..

The amp im using is a boston acoustics gt-2125 that will be paired with a hds210 d4 tuned to 34hz.

Amp will be parallel at 2ohms for max output of 600rms.

How do i go about returning my current settings for my re srx12d4 to factory and tuning it for the new sub?

I know to use a multimeter but as far as that goes i'm dumb as to what to be at. I really dont want to blow this or have any hiccups in the process or future. Max volume for the headunit is 45 and i top it off at 30. 12bass boost just so i can turn the thump down if its too much. 12 treble. Thanks dudes!

Click to read more...

 

[C1500martin 10+ year member]

never use bass boost/loudness/ or any of that.

leave it off set gains with dmm, your desired ac voltage is 34.64. if its not loud enough get more power. DONT turn up bass boost or anything.

 

[jokersace69]

never use bass boost/loudness/ or any of that.
leave it off set gains with dmm, your desired ac voltage is 34.64. if its not loud enough get more power. DONT turn up bass boost or anything.

I figured leave the bass boost off. Only reason i did it with this sub was to compensate for not having a remote. Voltage is at 26.00 but good to know 34.64. Would i use a 50hz tone as well? Im already set and was told that this new sub will destroy what i already have since it has an rms of 300. Plus the enclosure for the sub is way too small. Hence, why i finally had someone build me one as apossed to a pre-fab.