Hook me up , need 2- 10"s

[wrx_dad 10+ year member]

About a year ago I built a custom box that eD provided to me. The box is tuned for 2 cubic ft (1 cubic ft each) and instead of going w/ eD, I would like to try different subs on this box.

I think its set for 30hz, but how can I tell?

I know, I am stupid, but maybe being out of the game for so long make me need to refreshin my memory.

Thanks for any suggestions on 2- 10" subs and also if known, how to tell what the box is tuned at or is it more towards the Xover on the amp as for the hz?

//content.invisioncic.com/y282845/emoticons/crap.gif.7f4dd41e3e9b23fbd170a1ee6f65cecc.gif

Click to read more...

 

[wrx_dad 10+ year member]

Opps - here is the box:

Not bad for jig saw, sucky wood screws and lots of caulk //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

lol.

From what I remember the eDs did sound good in my Ford Xploder... but now I got an older model Nissan Pathfinder (1995) that I want to bump. I sold the eD subs back when I 1st built the box. I probably want to say its been about 1.5 yrs ago to be exact. So I plan to do a whole new rebuild. Thanks for putting me into the new school.

Stinks to see that Phoenix Gold, Lanzar, Kicker, PPI and Rockford Fosgate are not the top dawgs as they were in the early 90's when I was heavily into BUMP'ing. So this is why I need to get back up to far on whats out there. Thanks

 

[dadydolas 10+ year member]

im confused

how much power do u want to give the pair and how much room for them

 

[Ridinhi 5,000+ posts]

http://www.mtx.com/caraudio/archive/blueExtreme.cfm

selling two of these 10's for $90.00 shipped in mint condition

 

[dadydolas 10+ year member]

About a year ago I built a custom box that eD provided to me. The box is tuned for 2 cubic ft (1 cubic ft each) and instead of going w/ eD, I would like to try different subs on this box.
I think its set for 30hz, but how can I tell?

I know, I am stupid, but maybe being out of the game for so long make me need to refreshin my memory.

Thanks for any suggestions on 2- 10" subs and also if known, how to tell what the box is tuned at or is it more towards the Xover on the amp as for the hz?

//content.invisioncic.com/y282845/emoticons/crap.gif.7f4dd41e3e9b23fbd170a1ee6f65cecc.gif

yeah the length and width will determine the port tuning

http://www.carstereo.com/help2/Articles.cfm?id=31

use this

 

[wrx_dad 10+ year member]

yeah the length and width will determine the port tuning
http://www.carstereo.com/help2/Articles.cfm?id=31

use this

Sounds like a better understanding.

From outside dimms, the Length is 35" , height is 16" and the width is 15"

 

[dadydolas 10+ year member]

Sounds like a better understanding.
From outside dimms, the Length is 35" , height is 16" and the width is 15"

ok give me inside dimensions minus wood of box and port seperately

 

[dadydolas 10+ year member]

do u know the cubic ft of ur box minus port

 

[wrx_dad 10+ year member]

im confused
how much power do u want to give the pair and how much room for them

Shoot tell me //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

The last time I was pushing these two 10" eD's was by two different Circuit City amps and both got really, really hot. The Bazooka amp was like BURN HEAT HOT and the MTX just pain out sucked. I did bridge both amps when I tried. I probably didn't even give it time to break in the subs,,,, but I was tried of the amp try out game.

Just gimme a AMP and let my $hit pound. I do have to say that the Bazooka amp that I did try did push the 10" really well, but it was just getting way hotttt.

//content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif

 

[wrx_dad 10+ year member]

ok give me inside dimensions minus wood of box and port seperately

Aight brb

 

[Tramatized 10+ year member]

what kind of subs are you gonna run before you get to talkin bout amp

 

[dadydolas 10+ year member]

Shoot tell me //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif
The last time I was pushing these two 10" eD's was by two different Circuit City amps and both got really, really hot. The Bazooka amp was like BURN HEAT HOT and the MTX just pain out sucked. I did bridge both amps when I tried. I probably didn't even give it time to break in the subs,,,, but I was tried of the amp try out game.

Just gimme a AMP and let my $hit pound. I do have to say that the Bazooka amp that I did try did push the 10" really well, but it was just getting way hotttt.

//content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif

ok we can fix this quick

give me how much u want to spend how much room u got

if u r sticking to current box i need to know everything about that

and what ur goal is loud as u can be

sound good or sound great

or a mixture and what u r willing to sacrifice to achieve that goal

 

[Tramatized 10+ year member]

and i would venture to say that you can get a better amp then bazooka lol but if money is tight i understand

 

[dadydolas 10+ year member]

what kind of subs are you gonna run before you get to talkin bout amp

he doesnt know yet from what i know

sugestions

?

 

[dadydolas 10+ year member]

and i would venture to say that you can get a better amp then bazooka lol but if money is tight i understand

ya think

j/k man but if he cant go better than that then were done here