Hmm, not what I expected.

[Slo_Ride 5,000+ posts]

also, this may seem stupid but make shure you have both coils wired in phase.(if its a dvc)
iam polish and have goofed that up in the past but at least i have an excuse.//content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

lol I'll make sure of that. Really appreciate the help, wasnt sure what I would get when i first posted.

 

[thevic24 5,000+ posts]

lol I'll make sure of that. Really appreciate the help, wasnt sure what I would get when i first posted.

no problem, i have lots of expierence with the kin of your sub so if i can help...

by the way, what part of ga are you in?

 

[Slo_Ride 5,000+ posts]

halfway between macon and savannah off I-16. Yeah I might have a few questions on the final box as its not gonna be the same design, this was just something quick for me to build to listen to until i finish the final one. I'll post pics of what it gonna look like a little later, so check back if you dont mind

 

[Seth_3515 10+ year member]

not trying to be a dick earlier but seriously, if you want a good sounding substage follow what I and other have said 16-20 inches of port/cubic foot that sub will blow you away...

 

[thevic24 5,000+ posts]

halfway between macon and savannah off I-16. Yeah I might have a few questions on the final box as its not gonna be the same design, this was just something quick for me to build to listen to until i finish the final one. I'll post pics of what it gonna look like a little later, so check back if you dont mind

shure thing, if you like i can give the exact measurements of my box uncluding the port length and so on if you like. shoot me a pm, its out back in the garage so it will only take a second to measure up.

 

[sjobas 10+ year member]

or if you can fit an external port in your car this is a good way to have dbz.. 150db with a single 3510 in a blazer

http://forum.soundpressure.com/showthread.php?t=8457

 

[Slo_Ride 5,000+ posts]

This it is basically what the final box will look like. to fit behind my seats.

 

[Slo_Ride 5,000+ posts]

 

[Slo_Ride 5,000+ posts]

It was gonna be used for four e8's but never got used. the hdc310 will be mounted inverted facing frontwards angle slightly up. i guess i can put a slot port facing up in it.

 

[thevic24 5,000+ posts]

what is this going in and what are your max measurements?

 

[Slo_Ride 5,000+ posts]

what is this going in and what are your max measurements?

40"L x 15"T x 8.5"D

1987 Toyota MR2

 

[Slo_Ride 5,000+ posts]

angle of box is 28 degrees

 

[thevic24 5,000+ posts]

thats a tough car to fit a box in. with the added port area it should be rather sick even with the power you have.

i will go measure how long my port is and let you know.(mine is tuned to 36-37hz)

 

[7ender 10+ year member]

which way are you facing sub/port?

 

[pr-festiva 10+ year member]

never mind didnt see the other pages