Hmm, not what I expected.

[Slo_Ride 5,000+ posts]

My HDC310 isnt what I expected. Ok so I finished my box and got everything installed today. Amp is a Sundown SAE 1200d. Box is 1.5 cubes tuned to 36hz with a 4" port. There just isnt much output and there is an ass of port noise. My girl friends cheap RF 12" hits much harder off of only 400 watts. It moves plenty just doesnt seem to have much volume. Frustrated as crap, dont know, just gonna take a break and see if I can fiqure it out later. I guess I'll try building another box but dont really know what to do differently.

Click to read more...

 

[integra88 10+ year member]

What sub, etc. are you using. Need more info..

 

[Toone 10+ year member]

pic of box? pport flared?

 

[Slo_Ride 5,000+ posts]

What sub, etc. are you using. Need more info..

first sentence

 

[Slo_Ride 5,000+ posts]

pic of box? pport flared?

give me a minute and I'll get a pic, used pvc pipe for port as I have many times.

 

[Cameron_B 10+ year member]

You sure the amp is setup right?

 

[Immacomputer 10+ year member]

A single 4" PVC port is NOT going to be enough port area for that sub with that power, especially since it's not flared. Three non-flared 4" PVC ports would be better or a single 6".

 

[Slo_Ride 5,000+ posts]

 

[Slo_Ride 5,000+ posts]

You sure the amp is setup right?

yes, thats the first thing I thought

 

[Slo_Ride 5,000+ posts]

A single 4" PVC port is NOT going to be enough port area for that sub with that power, especially since it's not flared. Three non-flared 4" PVC ports would be better or a single 6".

damn really, cant do three 4"s, guess I'll try a 6" but its gonna be long as hell.

 

[Slo_Ride 5,000+ posts]

 

[S.B.C. 10+ year member]

Add another piece of 4in pvc- same lenght etc...

Slot port ftw

 

[Cameron_B 10+ year member]

No, a single 4" port is fine for 1.5 cubes... are you sure the tuning is correct?

3 4" ports would cause HUGE unloading issues

 

[tylork92 10+ year member]

No, a single 4" port is fine for 1.5 cubes... are you sure the tuning is correct?
3 4" ports would cause HUGE unloading issues

exactly wat i was thinking./

 

[Cameron_B 10+ year member]

Add another piece of 4in pvc- same lenght etc...

Huh? then he would have a huge increase in tuning...