Help with conecting wires from sub into amp

[middlemaniac 10+ year member]

Hi. I need help on the wires coming out of my two subwoofers going into the amp. Since my amp is 1ohm stable I wired my two 4ohm subwoofers down to 1ohm to get more power. I just need help on which +/- outlets to put the two wires coming from my subs should go in. The amp is like this ++-- and I am connecting the positive wire coming from my subs into the first + outlet, and the negative wire coming from the subs into the last - terminal. Is this correct???? Do I need to do anything with the terminals in between???

Click to read more...

 

[99grandprixGT 5,000+ posts]

is it a 1 channel amp?

 

[middlemaniac 10+ year member]

it is a monoblock amp class D.....it is this one http://www.polkaudio.com/caraudio/products/amps/pa600_1/

 

[john denver 10+ year member]

There,s at-least one thread a week about this same question

 

[99grandprixGT 5,000+ posts]

then if its mono it does not matter which they go to. your subs Dual 4ohm? so you have it wired like this your good.

 

[john denver 10+ year member]

Jsut put all + together and all - together and straight to the amp

Yeah like he posted ^^^^^

 

[middlemaniac 10+ year member]

i did that.....but want to know where the two wires that come out of the subs connect to the amp. The amp is like this ++-- and right now I have it connected to the first positive, and the last negative(is that right?)