HELP what do u think????

[CaddyLacGrills 10+ year member]

ok what do u think about this set up

Rockfordfosgate 1200 watt amp

1200W peak power @ 4 ohms, bridged

400W RMS (continuous) x 1 @ 4 ohms, bridged

200W RMS (continuous) x 2 @ 2 ohms

100W RMS (continuous) x 2 @ 4 ohms

and 2 kove armageddon m series 600 watt rms 4 ohm DVC subs

what u think and how do i wire it properly

__________________

Click to read more...

 

[ramos 5,000+ posts]

Sounds like a pretty good setup to me. What kind of enclosure ? There are a couple ways to achieve basically the same thing.

Here is if you want to run the amp mono at 4ohm

And here is if you want to wire each sub to it's own channel. Wire each sub this same way.

//content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[CaddyLacGrills 10+ year member]

its going into a seald box

the subs are dual 4 ohm

so can the amp take that???

 

[ramos 5,000+ posts]

yeah man. 4ohm dvc's wired like the first diagram. Will present the amp a 4ohm mono load. 400w x 1 at 4ohm

The second would present the amp a 2ohm load on each channel.

200w x 2 at 2ohm.

Which is obviously the same amount of power. //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[CaddyLacGrills 10+ year member]

how do i get the full 1200 watts (600 watts to each sub)

to the subs?

 

[Randy Savage 5,000+ posts]

Originally posted by CaddyLacGrills how do i get the full 1200 watts (600 watts to each sub)

to the subs?

You won't. The amp only states 400x1 t 4 ohms bridged, I would expect around 500 at 4 ohms on the birthsheet...

Did you buy the amp yet? I really think that is insufficient power for the Armageddons, especially if they are sealed.

 

[ws140 10+ year member]

that is peak power the amp will never produce that power. Look for somethting that puts out rms that is the true power.