Had enclosure built for an FI Q 15

B_Campbell
10+ year member

INC DFW
1,963
0
Texas *****
1108081725ir7.jpg


I could sit here and type all day, but I am going to keep this short.

Q > Ava - both on my MD2D, same truck. Ava was in a Team Toxic Bass designed enclosure tuned low. This enclosure for the Q is tuned at 33hz.

It (Q) is getting louder at every note, with less power and it is not hollow in any aspect like the Ava. I guess I do prefer a little distortion vs a flat response. Oh yeah, and this sub doesn't fall flat on its face after 45hz.

Box was built at Custom Sound Works here in Lubbock. I was referred to them by a few members off this board, and I am glad I was. Mike Jones from Custom Sound Works really wanted me to go with this box design, I was skeptical at first, but I am **** glad I took his word. The build quality is awesome, and the box and sub have blown me away. Louder and crisp. Love it.

I can't wait to try out a Havoc...

 
Around (under) 5 after displacement. The port design is strange, I have 60sq inches. Looks bigger than it really is, because it legs to made it stand up with over the tranny hump, and my passenger seat is leaned way back, but it is on the hefty side of things

 
The SS forum goes down, I find this one and start getting back into car audio. //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

Whats the story with that carpet? Where's it from? I bet it'd match my trunk better than my SEM coated grey carpet.

 
the box looks huge, but i guess with the legs how your said it makes since. The carpet matches very well in that interior though.
I think yours is bigger //content.invisioncic.com/y282845/emoticons/tongue.gif.6130eb82179565f6db8d26d6001dcd24.gif

looks nice but looks like it needs more port, unless thats a second port i see on the far side, then //content.invisioncic.com/y282845/emoticons/thumbsup.gif.3287b36ca96645a13a43aff531f37f02.gif

 
I think yours is bigger //content.invisioncic.com/y282845/emoticons/tongue.gif.6130eb82179565f6db8d26d6001dcd24.gif
looks nice but looks like it needs more port, unless thats a second port i see on the far side, then //content.invisioncic.com/y282845/emoticons/thumbsup.gif.3287b36ca96645a13a43aff531f37f02.gif
//content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

It looks like there is a second port on the far side to me, although i didn't notice it the first time i looked @ it.

 
Box was built at Custom Sound Works here in Lubbock. I was referred to them by a few members off this board, and I am glad I was. Mike Jones from Custom Sound Works really wanted me to go with this box design, I was skeptical at first, but I am **** glad I took his word. The build quality is awesome, and the box and sub have blown me away. Louder and crisp. Love it.
WHO !?!

 
Looks good. I wasn't a fan of my Q in a low tuned box, shoulda tried it higher like yours.

Can't wait to try my havocs //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

I would face the port and sub back. Even if you got a soft top, the rear gate will serve as a loading wall. I looked at the specs for the 10w6v3...
3
2K
Could not tell you, but you may want to start by going to crutchfield and get a consensus on the 7 or so replacements they recommend. That average...
1
725
You could try to make the port longer, but there might be other reasons with the box won't extend lower, or even the sub. You'd have to reverse...
3
697

About this thread

B_Campbell

10+ year member
INC DFW
Thread starter
B_Campbell
Joined
Location
Texas *****
Start date
Participants
Who Replied
Replies
19
Views
1,533
Last reply date
Last reply from
LaserRed38
1000007975.jpg

Mr FaceCaser

    May 16, 2024
  • 0
  • 0
1000007974.jpg

Mr FaceCaser

    May 16, 2024
  • 0
  • 0

New threads

Top