Get me down to 2 from this list...sub amp

[perferd 10+ year member]

Need an amp for a sub(s) and this is what will fit that I can find or know of, spot measures no more then 13"x 9.25"

JL XD600/1...400W @ 4ohms, 600W @ 2ohms $399

Alpine PDX-M6...600W @ 4ohms, 600W @ 2ohms $359

Boston GTA-800M...500W @ 4ohms, 800W @ 2ohms $299

PPI P1000.1...580W @ 4ohms, 725W @ 2ohms, 1000W @ 1ohm $239

Arc KS300.2...700W @ 4ohms bridged $369

Arc KS500.1...450W @ 4ohms, 600W @ 2ohms $469

Acr XDi 1000.1...650W @ 2ohms, 1150W @ 1ohm $299

Prices are from woofer btw...

Click to read more...

 

[Why So Cereal? 5,000+ posts]

Boston GTA, there down to one. Now go for it

 

[quackhead 10+ year member]

The PPI is underrated and clean enough...that is my pick out of the bunch.

 

[mclerico83 5,000+ posts]

MMATS Amplifier Class D D1600.0 1ohm stable | eBay

here you go, american made 1150rms and one of the most effecient amps you can buy best deal for 300 out of any

WoofersEtc.com - D1600.1 - Mmats 1 Ch 1600 Watt Amplifier

msrp on them is 600 bucks

11x8 inches

 

[Dirtrider4eva 10+ year member]

arc for sure.

 

[Falcons 5,000+ posts]

i was thinking arc

 

[Phoenix Risen 10+ year member]

MMATS Amplifier Class D D1600.0 1ohm stable | eBay
here you go, american made 1150rms and one of the most effecient amps you can buy best deal for 300 out of any

WoofersEtc.com - D1600.1 - Mmats 1 Ch 1600 Watt Amplifier

msrp on them is 600 bucks

11x8 inches

^^^^ this with out question, especially for that price, MMATS amps are monsters.

 

[quackhead 10+ year member]

MMATS Amplifier Class D D1600.0 1ohm stable | eBay
here you go, american made 1150rms and one of the most effecient amps you can buy best deal for 300 out of any

WoofersEtc.com - D1600.1 - Mmats 1 Ch 1600 Watt Amplifier

msrp on them is 600 bucks

11x8 inches

1150 watts RMS on a 60 amp fuse at 13.8v...lol...I call bullshit, I don't care where it is made...It will need at least a 80a fuse. If it is even possible to be 100% efficient(which it is not), you are still only going to be able to pull 1035 rms through the 60a slow burn fuse and that is at 25% above the fuse rating...and let's just say our 60a fuse can handle +25% added current and the amp is 90% efficient (which It is still not), then you are looking at a max rms wattage of only 930 watts...but if you go by the Mmats website, they specifically state a max efficiency of 76% at full rated output...now we are down to a measely 787 watts rms.

If you told me the Mmats D1600.1 amp is a 600 watt rms/1200 watt max at 1 ohm amp, then I would be inclined to believe you.

 

[AnthonyO 10+ year member]

Boston GTA-800M...500W @ 4ohms, 800W @ 2ohms $299

^^^Gets my vote^^^^^^

 

[mclerico83 5,000+ posts]

1150 watts RMS on a 60 amp fuse at 13.8v...lol...I call bullshit, I don't care where it is made...It will need at least a 80a fuse. If it is even possible to be 100% efficient(which it is not), you are still only going to be able to pull 1035 rms through the 60a slow burn fuse and that is at 25% above the fuse rating...and let's just say our 60a fuse can handle +25% added current and the amp is 90% efficient (which It is still not), then you are looking at a max rms wattage of only 930 watts...but if you go by the Mmats website, they specifically state a max efficiency of 76% at full rated output...now we are down to a measely 787 watts rms.
If you told me the Mmats D1600.1 amp is a 600 watt rms/1200 watt max at 1 ohm amp, then I would be inclined to believe you.

if you never used one then dont comment. how does a cadence a7hc put out 1400rms clamped on 80 amps, fuses can handle double the power for small amounts of time. mmats is a highly regarded brand and quak you are the only person on this forum who wil lever doubt a mmats amp.

Signal to Noise Ratio >90dB

Low pass frequency crossover 35Hz~300Hz

Subsonic filter 10Hz~60Hz

Bass boost @ 45Hz 0~18dB

Phase shift control 0~180 degree

Frequency response 10Hz~350Hz (+/- 1dB)

T.H.D @ 4 ohm

Efficiency @ 4 ohm 86%

Fuse rating 25A x 3

Input Sensitivity 200mV to 6V (+/- 5%)

Dimensions 252(W) x 58(H) x 294(L)mm

so quak how much power does this amp put out

 

[Flex68 10+ year member]

MMATS Class D D1600.1

Specifications

D1600.1

STABLE TO: 1 ohm

SINE-WAVE POWER

@ 13.8 Volts:

Watts @ 1 ohms mono 1 X1600

Watts @ 2 ohms mono 1 X 900

RESISTIVE (RMS) POWER

@ 13.8 Volts:

Watts @ 1 ohms mono 1 X 1150

Watts @ 2 ohms mono 1 X 625

Idle Current: 1.5 amp

Signal to Noise Ratio A-Wtd:

Total Harmonic Distortion: 0.3%

Channel Separation: N/A

Input Sensitivity: 150mV-2.5V

Slew Rate: 13V / Usec

Fuse Rating: 60 amp

General Information:

Frequency Response:

Low-pass Filter: Variable 24db, 77 to 275Hz

Battery Connectors: 2 Gauge

Speaker Connectors: 8 Gauge

 

[perferd 10+ year member]

MMats is too expensive...

Votes so far with other sites:

PPI - 3

Arc KS300 - 3

Boston - 2

JL - 1

Arc KS500 - 0

Arc XDi - 0

Alpine -0

 

[naughtyca 10+ year member]

MMATS Amplifier Class D D1600.0 1ohm stable | eBay
here you go, american made 1150rms and one of the most effecient amps you can buy best deal for 300 out of any

WoofersEtc.com - D1600.1 - Mmats 1 Ch 1600 Watt Amplifier

msrp on them is 600 bucks

11x8 inches

^^^ this too

 

[perferd 10+ year member]

The MMats is too expensive...

From the list?

 

[mclerico83 5,000+ posts]

The MMats is too expensive...
From the list?

its 299 shipped brand new ??????

MMATS Amplifier Class D D1600.0 1ohm stable | eBay