Freelanders Build Log

[Freelander 10+ year member]

Have you try your sub in that box, if you did have you notice any port noise, cause i want to make a box like that for my sub, but i'm a little scared about port noise with just 2 4" and i dont want to use more than that.

Haven't tested it yet but plan on doing so soon. I'll take videos. That box might even go up for sale soon as I think I might want to build a different box....more custom

 

[Rashaddd 5,000+ posts]

Diggin the cleanness of the box, very nice

For me it is, lol.

Why do you go to every build log thread and discredit it and try and belittle it...no one gives a fvck if his system is 'little' to you...it just makes you sound like a dumbass stuckup *** nugget

no disrespect to you, don't take it that way

 

[Hitler 10+ year member]

around 4000wrms total, not that "little" for a daily system....lol

Umm maybe i missed something but how is it even close to 4000rms?

 

[Freelander 10+ year member]

Umm maybe i missed something but how is it even close to 4000rms?

4000wrms total. I have my MMATs D300HC, Clarion 3200A and I and going to run another 4 channel amp.

BTW for people who don't know about the MMATS D300HC its puts out WAY more power than its "1200wrms" rating //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[Hitler 10+ year member]

And that 1/0 crimp connecter is barely even on the breaker. You need a washer on there. I wouldnt be supprised if you issues with current loss.

 

[Freelander 10+ year member]

And that 1/0 crimp connecter is barely even on the breaker. You need a washer on there. I wouldnt be supprised if you issues with current loss.

Not trying to be an *** but nothing has been installed....that was the test fit for the bracket I made for the 200amp circuit breaker. It was just stuck on to make sure it was going to work. Trust me it will be secured and be covered a lot better once the install is started. Think I would let that much copper sit next to metal where it has a chance to ground out? Sorry not that dumb.

 

[Hitler 10+ year member]

4000wrms total. I have my MMATs D300HC, Clarion 3200A and I and going to run another 4 channel amp.

1200rms + 500watts.

Do you not know math?

That other 4 channel would have to be a 2500.4 to be even close.

 

[Freelander 10+ year member]

1200rms + 400watts.
Do you not know math?

That other 4 channel would have to be a 2500.4 to be even close.

Do you not know anything about car audio? The MMATs D300HC benched I think 2147 when I bought it, the clarion 3200a is rated at 400wrms @ 12v thats 2500 right there with no other amp. And the clarion will put out more than 400wrms at 14.4v. Not to mention I could be running everything at 2ohm.

Not only that you have no idea what the final setup will be do you?

Thanks for trying but have a nice day //content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif

 

[Freelander 10+ year member]

1200rms + 500watts.
Do you not know math?

That other 4 channel would have to be a 2500.4 to be even close.

And do you not know math 2500.4 usually means 2500x4

2500+

2500+

2500+

2500+

That ='s 10,000.....I think its you that needs to learn math.

The setup might not be exactly 4000wrms total when done, but it will be close //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[Hitler 10+ year member]

Do you not know anything about car audio? The MMATs D300HC benched I think 2147 when I bought it, the clarion 3200a is rated at 400wrms @ 12v thats 2500 right there with no other amp. And the clarion will put out more than 400wrms at 14.4v. Not to mention I could be running everything at 2ohm.
Not only that you have no idea what the final setup will be do you?

Thanks for trying but have a nice day //content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif

I know a lot more than you thats for sure, and that amp certainly did not bench 2147. Stop dreaming. Those amps when modded can burp that at .5(not daily buddy) even if it did the Q cant take that power. Also you will never see 14.4v with the work listed so forget all that. Go for it, run it at 2 ohm! Than maybe the clarion will put out 500 watts. And than lets all imagine that your magical d300 can put out 2000 watts. Thats still not 4000 watts //content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif.

 

[Hitler 10+ year member]

And do you not know math 2500.4 usually means 2500x4
2500+

2500+

2500+

2500+

That ='s 10,000.....I think its you that needs to learn math.

The setup might not be exactly 4000wrms total when done, but it will be close //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

Since when? Its not even worth argueing with you, your just one of those retards who always thinks there right even when they get proven wrong. Amps NEVER get rated that way....

no it wont, it will be about 1500rms get over yourself //content.invisioncic.com/y282845/emoticons/rolleyes.gif.c1fef805e9d1464d377451cd5bc18bfb.gif

 

[Freelander 10+ year member]

I know a lot more than you thats for sure, and that amp certainly did not bench 2147. Stop dreaming. Those amps when modded can burp that at .5(not daily buddy) even if it did the Q cant take that power. Also you will never see 14.4v with the work listed so forget all that. Go for it, run it at 2 ohm! Than maybe the clarion will put out 500 watts. And than lets all imagine that your magical d300 can put out 2000 watts. Thats still not 4000 watts //content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif.

7
how about you read the link I posted where a car audio mag bench tested a d300hc and got 1800wrms at 2 ohm....Like I said you have no idea what is planned with the system.

You have like 17 posts. I bet you are are 13yr old punk who don't even have a car...lol

Maybe the Q is going to be replaced by a BTL? You don't know shit thank you, have a nice day //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[Freelander 10+ year member]

How about Hitler posts his system so we can see how great his shit is? Wait I bet he don't have one //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

Also....you said with the "work listed" I haven't listed any work really that has been done....just really listing stuff as I buy it.

How about you review basic math, actually get a system, then post yours up and stop trying to talk shit in other peoples threads.

 

[lyttleviet 10+ year member]

lookin' good man. Let me see the finished product!

Man, sorry to see all these people whoring up your thread man //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif

 

[Freelander 10+ year member]

lookin' good man. Let me see the finished product!
Man, sorry to see all these people whoring up your thread man //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif

I'm not worried about it, most people like what they see. I'm not building it for anyone but myself, are there things I want to upgrade? Yes! But am I proud of what I have so far? Yes.

I've learned most of the haters on this site don't even have systems or know what they are talking about. So it don't bother me one bit.

Its just a shame that there are people in this world who have nothing better to do then to try to argue over the internet, like it makes them feel better about themselves. Get a life.....you know who I'm talking to //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif