For those of us with mini trucks....

[bunkerking09 10+ year member]

Who has had problems with the subs and the back of the seats? I don't want them to be rubbing against the back of the seat, cause that will cause more heat. but with the mounting depth of these death penalties, i may have to...

The plans for now are to build a false florr to get that annoying hump out of the way, stash the amps underneath that, then build a wedge box to go up to the window line.

~6 cubes, subs forward, ports up w/ 4 4" psp's.

i just ordered those so that IS what i will be using.

Click to read more...

 

[jdawg 5,000+ posts]

standard cab?

 

[crunktimes.com 5,000+ posts]

with 6 cubes i dont tink so

 

[bunkerking09 10+ year member]

standard cab?

no, its extended. I guess I could make the bax have a depth of like 13...then I could even recline //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[Trey803 5,000+ posts]

I dont think 6 cubes would even fit in my cab

....I didnt know it was extended cab

 

[jdawg 5,000+ posts]

why do you have a prob with the subs rubbing then? I fit 8cubes sealed in my 95 S15, firing forward, under the window line and could put the seat back G style.

 

[bunkerking09 10+ year member]

with 6 cubes i dont tink so

box plans are 49 x 24 x 12, so ~6.5^3 before displacements, 6^3 after subs

Whats the displacement on those ports 17" long?

 

[etznova 10+ year member]

yep that is the main down fall you will lose leg room

I have my 9515 in a 5cu's the box sits on the ledge and goes all the way to the window line and takes up the whole length of the truck and is i think 12" deep sub forward on pass. side with 2 6" areos up on the drivers side the amps are on the floor partly under the box

 

[etznova 10+ year member]

box plans are 49 x 24 x 12, so ~6.5^3 before displacements, 6^3 after subs
Whats the displacement on those ports 17" long?

are you removing the side panels

wait is it a s10 or ranger, dakota

 

[bunkerking09 10+ year member]

why do you have a prob with the subs rubbing then? I fit 8cubes sealed in my 95 S15, firing forward, under the window line and could put the seat back G style.

I guess I should be fine. I didn't take into account that I could make it mush less depth...

I was thinking I would have to make it so that the ports would have to fir behind the subs, but I can put it on either side...so long ways(49") my box will go like this...

port, sub, port, port, sub, port

 

[jdawg 5,000+ posts]

I didnt have ports to take up displacement though, but 4 12's and 1600w could flip quarters about a foot off the roof

 

[bunkerking09 10+ year member]

are you removing the side panels


wait is it a s10 or ranger, dakota

keeping the side panels, i took out the back seats.

its a ranger

 

[jdawg 5,000+ posts]

upfire the ports

 

[etznova 10+ year member]

keeping the side panels, i took out the back seats.
its a ranger

ok gotcha

the ranger is alittle wider on the inside than the s10 i wasn't able to fit 49" in mine with the side panel

 

[bunkerking09 10+ year member]

upfire the ports

I will for sure. 5.5 cubes with 4 4" ports at 17" will tune it to 36...wish I could get to like 32...