please excuse all the crap laying around...
I am snapping pics as I go
here is my 1993 Ford Tempo....
soon to be Tempo with Tempo //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif
the head unit is installed....all connections silver soldiered
as you can see the interior is MINT....
I used a Bolt and lock washers to bare shinny metal to ground
the amp...tight as it will go with out stripping it
this is only temporary....the BPX 2200.1 is Bolted to the floor
under the drivers seat...
Pain in the ass the floor has a hump in it so I had to level it out
with some MDF
once I am done the big enclosure for all 4 subs the amp will
have a new home...
here is a snapshot of my first test box....this one is 1.60cf3 plus port
and sub dissplacement tunned at 32hz....
27sq inches of port area
the inside of the kerf cut is fiberglassed and I added another 45*
and filled in the corner by the baffle...
being a test box I only did a single sided flare....
I wanted to take morew pics but my Camera eats batteries like
a mother..more pics coming tomorrow
I left the stalk alt in for now....I have to fab up a bracket
for the Iraggi at work sometime during the next week or two
but I ran a 4 gage line from the alt
out put to the battery....tomorrow I will add another ground from battery -
to the chassie
and if I can figure out how I'll test my camera's video capability...
these Wgti subs are INCREDIBLE...it sounds like a pair of 12"
in the trunk
as soon as the components get here I can start fiberglassing
some pods....
the tweeters have wave guides so I am going to try and fit
them into the install