final ohm load of 2 ohms

[BIGBLK74 10+ year member]

ok so i know this might sound dumb but im wondering which set of subs to buy. both pair are DD 9515's, one set is Dual 1.4 ohms and the others is a dual .7 ohms. i am wondering which config would be best to run at a final ohm load of 2 ohms to each sub ???? any help is greatly appreciated...

Click to read more...

 

[Bassin Buick]

dual .7 , that would get you closest to 2 per sub , after imp rise you should be right in the 2 ohm neighborhood

 

[Phoenix Risen 10+ year member]

are you trying to get to 2 ohms after both subs are wired together or 2 ohms individually?

 

[BIGBLK74 10+ year member]

2 ohms individually, i got a two orion 2500d's that i will be powering them with..

 

[Phoenix Risen 10+ year member]

ok, just wanted to make sure, youll want the dual .7.

wiring in series will give you 1.4 ohm, which like bassin said, after your rise will set you right about where you want to be

 

[sobe3yourself. 10+ year member]

get two D4 if you can. that way, if you ever get one big amp in the future you can wire them down to 1 ohm and still keep them at 2 ohms each right now

 

[BIGBLK74 10+ year member]

i would but the chick im buyin them from only has two dual 1.4's and two dual .7's . i dont really think she knows what she has cause she is only selling each pair for $400 bucks, so im think i might buy all 4 and put them on here to make a nice lil profit //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[BIGBLK74 10+ year member]

i appreciate all the help guys...