crazy4ozs
Banned
hey guys so sunday...all day...me and IONSQL worked on my kicks and tweeter pods...there was a tornado about half way throuhg ou proccess so were nto quite done but this is what we have so far...//content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif enjoy!
the speakers will be put in teh kick panels while just the tweeters will occups teh door panel portion...all glassed in //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif
the stuff we worked with...
my door panel b4 the operation...
speaker ring...will be rescessed to give it that "different" look
after it got routered...is NOT sanded yet...
taping off teh door panel...the speaker grill was already cut out
first layer of resin on door panel...
first layer of resin on kicks...
glassing the kicks...(the door panels warped so we are goin to start those again later)
the speakers will be put in teh kick panels while just the tweeters will occups teh door panel portion...all glassed in //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif
the stuff we worked with...
my door panel b4 the operation...
speaker ring...will be rescessed to give it that "different" look
after it got routered...is NOT sanded yet...
taping off teh door panel...the speaker grill was already cut out
first layer of resin on door panel...
first layer of resin on kicks...
glassing the kicks...(the door panels warped so we are goin to start those again later)