Enclosure build for andrios' se 10

[bigbangtheory 5,000+ posts]

Man, you are pounding out the boxes now bud. Looking good as usual.

 

[Twisted_0912 10+ year member]

nice build man, should slam!

thanks

Man, you are pounding out the boxes now bud. Looking good as usual.

yeah i have been doin a few boxes lately. thanks

 

[KHARPS 10+ year member]

Nice job on the box Twisted. I had some port noise when I only used a single 3'' aero in 1.25 but I also had 1000w on my sub. Do you think since he'll probably only be using 600w he won't get any port noise?

 

[Twisted_0912 10+ year member]

Nice job on the box Twisted. I had some port noise when I only used a single 3'' aero in 1.25 but I also had 1000w on my sub. Do you think since he'll probably only be using 600w he won't get any port noise?

hopefully he should be ok. i hope:crap: what sub was it?

 

[KHARPS 10+ year member]

hopefully he should be ok. i hope:crap: what sub was it?

It was a Fi BL10 on 1000w in 1.25@33. But this was also in a reg cab truck with the port firing up and it was only about 16'' from my head. It would produce a ton of port noise on the lower notes. I'm sure he'll be fine though with it in the trunk and with only 600w. But nice job on the box again!

 

[Twisted_0912 10+ year member]

It was a Fi BL10 on 1000w in 1.25@33. But this was also in a reg cab truck with the port firing up and it was only about 16'' from my head. It would produce a ton of port noise on the lower notes. I'm sure he'll be fine though with it in the trunk and with only 600w. But nice job on the box again!

yeah he should be fine. i actually have a bl 15 and an se 15 right now and ill say the bl has alot more output than the se

 

[andrios 10+ year member]

I will be pushing 600w @1ohm with a nine.5.

 

[Twisted_0912 10+ year member]

I will be pushing 600w @1ohm with a nine.5.

you will be alright man

 

[andrios 10+ year member]

what are the actual dimensions??

 

[Bass Addict 10+ year member]

i see the machine is still at it lol keep up the good work !! precision builds FTW !

 

[Twisted_0912 10+ year member]

what are the actual dimensions??

27x11x12

i see the machine is still at it lol keep up the good work !! precision builds FTW !

thanks

 

[andrios 10+ year member]

Cant wait to get it!!!! Hows the progress so far??

 

[Twisted_0912 10+ year member]

Cant wait to get it!!!! Hows the progress so far??

carpet got here today

 

[jjjsssf]

Now that is a lot of brass air fittings http://www.liangdianup.com/subpages/airfitting_1.htm there is just about every type

of air fitting that you could want. Wholesale prices too. I guess these could be used as small water pipe fitting also. I

used some of the parts to make my babington wvo burner.

 

[andrios 10+ year member]

Now that is a lot of brass air fittings http://www.liangdianup.com/subpages/airfitting_1.htm there is just about every type of air fitting that you could want. Wholesale prices too. I guess these could be used as small water pipe fitting also. I

used some of the parts to make my babington wvo burner.

LOL thanks!